Why do some buttons not work on my remote?

Why do some buttons not work on my remote?

Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.

How do I reset my directv remote control?

If that didn’t help, try resetting the remote to its default factory settings:

1. Press and hold MUTE and SELECT together until the light flashes three times.
2. Press 9, 8, 1 and SELECT. The remote flashes four times and should now reset.

Why will my remote not change channels?

Remote will not change channels or turn on the TV. Batteries are low, dead, or inserted incorrectly. If the box turns ON or OFF, then install new batteries in the remote and try again. Make sure the equipment is plugged in to an active power outlet.

How do I reprogram my directv remote control?

Program remote for an HD DVR or HD receiver

1. Press MENU on your remote.
2. Select Settings > Remote Control > Program Remote.
3. Choose the device (TV, audio, DVD) you wish to program.
4. Follow the on-screen prompts to complete programming.

How can I program a DIRECTV remote to a different box?

Setting Up the DIRECTV Universal Remote Control

1. Point the remote at your receiver and press MENU on the remote.
2. Use the arrow button to highlight and select SETTINGS & HELP > SETTINGS > REMOTE CONTROL > PROGRAM REMOTE.
3. Choose the device you want to pair.
4. Follow the on-screen steps to complete the programming.

How do I reprogram my DIRECTV remote?

Standard DVR or SD receiver:

1. Press MENU on your remote.
2. Select Parental Favs & Setup.
3. Select System Setup.
4. Select Remote or Remote Control.
5. Select Pair/Program Remote, then select the device you wish to program.
6. Follow the on-screen prompts to complete programming your remote.

How do you reset an all in one remote?

All replacement remotes: How do I perform a factory reset on my Replacement Remote?

1. Hold down the GREEN + YELLOW key, until the LED blinks twice.
2. Enter the code 981.
3. The LED blinks now four times and everything is deleted from your remote control.

Why does DirecTV remote stop working?

Your DirecTV remote may stop working for a few different reasons. The first is that your remote has depleted batteries. Replace the batteries to fix this issue. The second potential cause for a remote that doesn’t work is that the remote has become damaged.

How to troubleshoot your DirecTV receiver?

Check the receiver’s power supply and outlet Make sure your TV is turned on. Press the Power button on the front panel of your receiver. If your receiver doesn’t turn on, continue to the next step. Unplug the ends of the power cord from the back of your receiver and the electrical outlet. Then, securely plug it back in at both ends. Press the Power button on the front panel of your receiver.

How do you program a DirecTV remote to a TV?

Turn on your TV and DirecTV box. Press “Menu” on your remote. Navigate to “Parental, Favs and Setup” and choose “System Setup.”. Pick “Remote” and select the option to program it. 2. Slide the switch on top of your remote control to “TV” mode.

How do you set up a DirecTV remote?

Setting Up a DIRECTV Universal Remote with On-Screen Pairing. This method should display a simple guide on the screen. To set up this type of remote automatically, you need to follow a few simple steps: Press the MENU button on your remote. In the MENU window, choose ‘Settings & Help’. Choose ‘Settings’. Find ‘Remote Control’ and select it.