Why is my dolphin Nautilus not moving?
If your pool robot doesn’t move at all, there may be a power cable error. (Was it run over by aliens?) If your Dolphin moves a few feet but then stops, it could be there’s a drive train or impeller blockage to blame so have a closer look: Inspect the impeller itself.
Can I leave my dolphin pool cleaner in the pool?
It is safe to leave your Dolphin cleaner in the water when not in use. While the unit can remain in the pool during use of the weekly timer function (if available on your model), we do not recommend leaving the cleaner in the pool for long extended periods of time.
Why is my dolphin pool cleaner not picking up dirt?
My Dolphin is not picking up dirt/debris, or it’s escaping out the top of the unit: • Check your filters and the impeller to make sure they are clean. Remove any debris from the impeller area. Check the intake opening on the bottom side of the cleaner for any obstructions. Check that the rapid drain flap is in place.
How do I reset my dolphin Nautilus CC plus?
With your Dolphin in use, press the “Reset” button. Hold the “Reset” button down for about 3-5 seconds. Check the Full Filter Light indicator, ensuring that it’s off. In essence, what you’ve just done is “zero” out the sensor.
Why does my dolphin pool cleaner do wheelies?
What causes automatic pool cleaners to flip or do wheelies? The water level in a pool is one of the most common causes for this problem. When the water level is too high, the water line is very close to the coping. So when the cleaner starts to climb the wall, it hits the coping and flips on to its back.
How do I fix my Maytronics power supply?
Troubleshooting
- Check that the power supply cable is plugged properly into the power supply socket. Check power to the socket and reconnect Pool Cleaner.
- Ensure the power outlet is functioning properly and that it has not tripped the breaker in the fuse box.
- Turn the power supply off.
- Unplug the power supply.
How often should I run my dolphin pool cleaner?
Ideally, you need to run your robot pool cleaner daily or at least once a day if you’re always swimming in it. But if you don’t swim in it as much, run it at least once weekly or every two weeks. When you’re using a swimming pool cover all the time, you may wash your pool monthly.
How do I know when my dolphin pool cleaner is finished?
SHUT DOWN – After about 3 hours of operation, the Cleaner will shut down automatically as indicated by the 4 LEDs turning off. The Cleaner can remain in the pool until you are ready to pull it out. Many people run the cleaner at night and take it out in the morning.
Why does my pool vacuum stay in one place?
The stronger the water flow, the more likely it is to get stuck in one place. You need some suction though or the pool won’t get cleaned properly. The easiest solution is a flow keeper valve. A flowkeeper valve is a valve that regulates the flow of water through the hose going to the cleaner.
How do I turn on my Maytronics pool cleaner?
TURN POWER ON – Press the ON/OFF switch on the Power Supply. The Cleaner will start to operate. Note: Four LEDs will light up in the corners of the switch indicating that the power is on.
How do you troubleshoot a Maytronics dolphin?
Why does my pool cleaner keep flipping?
The water level in a pool is one of the most common causes for automatic pool cleaners to flip over. When the water level on the skimmer is too high, the water line is too close to the coping. So when the automatic cleaner start to climb up the pool wall, it hits the coping and flips on to its back.
How does the Maytronics dolphin Nautilus pool cleaner work?
CLEAN FLOOR – The Dolphin Nautilus Cleaner will crawl along the floor using a self-learning program to optimize cleaning of your pool. CLEAN WALLS – When the Dolphin Nautilus Pool Cleaner comes to a wall, it will square up to the wall and climb it to the surface.
Can a nautilus CC Plus be used to clean pool?
The Nautilus CC Plus was designed to clean your pool, effortlessly. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean. Hello, Free time! Need a cleaner today?
What should the temperature be for a dolphin pool cleaner?
The Dolphin requires a standard 120v outlet for power. What are the ideal operating temperatures for my Dolphin cleaner? Dolphin robotic pool cleaners are best used in temperatures between 43 and 93 degrees. Should I remove the Styrofoam from the motor unit?
Can a dolphin pool cleaner be used outside of the US?
Dolphin pool cleaners purchased in the United States must be operated in North America in order to retain the warranty rights. Using any Dolphin pool cleaner outside of North America (that is purchased in the US) voids the warranty service agreement. Can I leave the power supply unit outside in the elements?