How much horsepower can 42lb injectors handle?

How much horsepower can 42lb injectors handle?

42lb’ers should be able to support close to 100hp a piece at 100% duty cycle, Your injectors must be dirty or something if they are maxing out at your power level.

How many cc are 42lb injectors?

440 cc/
Bosch 42 lb/hr (440 cc/min) Fuel Injector.

What are the symptoms of failing injectors?

Here are a few signs there might be something wrong with your fuel injectors.

• The Engine Misfires. Dirty fuel injectors may cause your vehicle’s engine to misfire.
• Idling Gets Rough.
• Your Gas Mileage Tanks.
• The RPM Needle Starts to Dance.
• Your Car Won’t Start.

What causes injectors to Overfuel?

Over fueling can also be caused when the injection timing is set incorrectly and the fuel injection happens too late in the piston pressure stroke. If you notice an excessive amount of black smoke coming from the exhaust, the engine could be over fueling.

What is the most common cause of injector failure?

So, the most common cause of leaky injectors is; the failure of the O-ring, where the injector meets the fuel rail. The O-ring can become, hard and brittle, from the heat of the engine. If it breaks, then fuel can leak out, over the engine. The other way an injector will leak is if, the injector body or nozzle cracks.

Can you replace just 1 fuel injector?

Yes, you can replace just one of the fuel injectors in your vehicle. If you are facing a problem with an injector, you can swap it for a good cylinder.

How do you know if your car is over fueled?

Symptoms of High Fuel Pressure

1. Check engine light.
2. The exhaust gives off fuel smell.
3. Low fuel economy and constant refuelling.
4. Poor engine performance.
5. Blackened spark plugs.
6. Spark plugs that are wet with fuel.
7. Restrictions in return line.

When did racetronix start making automotive performance parts?

Racetronix has been dedicated to the design and manufacture of high quality automotive performance parts since 1999. Through innovative engineering and design, using the highest quality materials and manufacturing methods, Racetronix has earned the respect of hundreds of thousands of satisfied customers throughout the world.

How many racetronix fuel systems are there in the world?

Racetronix fuel systems and electrical components are all manufactured in our high-tech facility to ensure the highest quality product. The Racetronix line now includes more than 5,000 products, specifically designed to the exacting requirements of a wide range of vehicle models.

How does a top feed disc injector work?

Top feed disc injectors use a small disc with six holes around its circumference. The disc rests on a short chimney that surrounds a metering hole. As the disc is raised off the chimney by magnetic force, fuel flows through the holes in the disc, over the walls of the chimney, and out the metering hole to form a full, finely atomized cone.

What is part number of Lucas disc injector?

Disc Injector click on image to zoom Part Number 01D030B (Lucas old 5208009, Lucas New 621031, Delphi old D3181AA) TYPICAL APPLICATIONS: High-performance, replacement for Ford/Bosch M-9593-F302(F), M9593-F304(F)