What is a twin screw vise?
Twin-screw vises can be made a number of ways – purpose-made metal screws and hand wheels, wooden-threaded screws, F-style clamps…. The thick jaws easily clamp out any slight cupping in the material, which is often a problem in wider stock.
What is a Moxon vice?
A Moxon Vice clamps to any bench, raising your workpiece to a convenient height and holding it rock-solid. If you cut dovetails and other joints by hand, this is a vice that will completely change your experience in the shop. Fast and effortless, the Moxon vice makes joinery a pleasure.
How does a screw vise work?
A vice has two parallel jaws which work together to firmly clamp an object and hold it in place. A threaded screw, which is connected to the jaws, runs through the body of the vice, and its movement is controlled by a handle, which is located on the outer end of a vice. …
How do I choose a woodworking vise?
Buying the best wood vise requires understanding where you’ll mount it, jaw size and how large of workpiece you’ll be clamping. But if you haven’t purchased or used a vice in awhile you’ll also want to understand features like quick release, pivot jaws, brands and your benchtop thickness.
How long should a Moxon vise be?
The Vise is made up of 2 parts, a front jaw and a rear jaw. The front jaw should be between 3/4” and 1-1/2” thick, 23-1/2” long and at least 4” tall. The rear jaw should be at least 1-1/2” thick, 29-1/2” long and at least 4” tall.
What is an end vise used for?
Typically, the primary function of an end vise is to hold material flat on the surface of the bench, pinched between one or more “dogs” sticking up from the top surface of the vise’s jaw and corresponding dogs fitted into holes in the bench surface.
Do you need chain operated twin screw vise?
Chain operated twin screw vises have been around for a long time and help solve that problem but they do require a lot of cranking for gross adjustments and the chain operation is not always smooth and precise. The Face Vise can solve this.
Which is the quick action twin shaft vise?
The Face Vise can solve this. TheVX20F face vise has a very quick action and clamps firmly in approximately one quarter turn of the clamp handle. It is the only quick action twin shaft vise on the market and the unique design operates without screws or chains!
What kind of vise do you use to clamp work?
Traditional twin screw vises excel at clamping wide work upright between the screws without racking. Unfortunately each screw needs to be turned independently to clamp the work.
Is there a non racking end vise on the market?
This is the only non-racking full-width end vise on the market. You can clamp anything anywhere in the vise and the jaws stay parallel. The chain drive ensures parallelism and eliminates the racking common in other vises.