What do the colors mean on polishing pads?
Yellow is a heavy cutting pad, orange is a medium-heavy cutting pad, green is a heavy polishing pad, white is a medium-light polishing pad, blue is a glazing pad, black is a finishing pad and finally, red is for a perfect ultra-fine finishing pad.
Whats the difference between a buffing pad and a polishing pad?
Buffing pads provide a more efficient means of working polish into your finish to remove defects, greatly reducing the time you spend correcting your finish. Polishing pads are better at holding the abrasives in polishes against the surface you’re polishing.
What is the blue polishing pad for?
The Hi-Buff Blue Foam Pad is to be used on clear coats, single-stage paint, or gel coats to remove very light micro scratches and light swirls for vehicles that are relatively new or the paint is in very good condition. Many show car enthusiasts use this pad to keep their car’s paint in tip-top shape!
What pad should I use to polish car?
It’s recommended that you use a wool pad in the beginning of the polishing job to remove any wax or sealants that have been applied to the surface. Using a wool pad to cut into the finish and get down to the metal is much more efficient than using a foam pad, which would take a lot longer to do the same job.
Can you reuse polishing pads?
Yes you can wash and reuse them but separate the applicator pads to a specific duty like paint, interior, exterior..etc. The reason you want to keep them separated like that is to prevent contamination. No matter how much you wash the applicators you will never remove all the residue in them.
What polishing pads do I need?
The green pad is most suitable for deep scratches and hard lacquers. The grey pad is most suitable for extreme gloss and soft lacquers. The yellow and white are in between. The yellow pad has a little more abrasive power, the white pad gives a little more gloss.
What size pads for 5 back plate?
On a 5″ bp the 6.5 pads will be a little too big for my liking. You won`t be able to apply pressure evenly. Also the 6.5″ pads are thicker and will be awkward on a 5″ bp. Go with the 5.5 inch pads, it`s a perfect fit.
What is a white buffing pad used for?
The pad is used for spray cleaning or dry buffing soft finishes using a rotary machine (175-800 rpm). It is also used for light cleaning under an automatic scrubber. This extra fine pad has been designed for polishing clean, dry floors. White polishing pads are a perfect match when used to polish marble floors.
What are the different polishing pads?
Different types of polishing pads
- Foam polishing pads. Probably the most common polishing pad, the foam pad comes in many different sizes, forms, colors and shapes.
- Microfiber polishing pads.
- Wool polishing pads.
- PE fiber polishing pads.
- Wetsand pads.
When to replace Porter Cable polisher part number 54745?
OEM Part Number 54745. Made in United States. The Porter-Cable 6-inch polishing pad improves the performance of the 7424 polisher. Over time, the pad on a polisher wears from normal use, decreasing its performance. To keep your polisher running at its peak, replace the pad when it becomes worn.
Is there a Porter Cable polishing pad for 7424?
This is an O.E.M. authorized part. Fits various Porter Cable models. OEM Part Number 54745. Made in United States. The Porter-Cable 6-inch polishing pad improves the performance of the 7424 polisher. Over time, the pad on a polisher wears from normal use, decreasing its performance.
Which is the best pad to use on a 7424 polisher?
The Porter-Cable 6-inch polishing pad improves the performance of the 7424 polisher. Over time, the pad on a polisher wears from normal use, decreasing its performance. To keep your polisher running at its peak, replace the pad when it becomes worn. It mounts easily using the built in mounting thread.