Are brodix heads any good?
Usually, big performance heads give up a little downstairs for midrange and top-end improvements, but in this case, Brodix proved superior at every lift point on both the intake and exhaust sides, from off the seat through 0.800-inch lift.
Does brodix make cast iron heads?
Brodix cast iron small block Chevy engine blocks are affordable options for your racing needs. These Chevrolet-compatible blocks feature premium iron alloy, priority main oiling, a choice of bore sizes, as well as numerous other features.
Where are brodix heads cast?
The stamping is usually located on the end of the casting above the accessory bolt area just below the valve cover rail. We have stamped some heads on the exhaust side of the head as well. The numbering system only identifies the casting model and the year the head was made.
How do I identify my SBC heads?
Chevy heads have often been identified by sight and most commonly by the different casting shapes on the ends of the cylinder heads. While these casting marks cannot tell specifics about the cylinder heads, they can help identify a performance head from a non-performance head.
What is a Dart Little M Block?
The Dart Little M is designed from the ground up as a true racing engine block which can be used with standard off the shelf small block components. Uses standard small block parts, including cam, timing chain, oil pump, oil pan, oil filter, motor mounts, mechanical fuel pump, and clutch linkage.
Where is brodix made?
Brodix Cylinder Heads, the Mena, Arkansas based company that revolutionized the aftermarket cylinder head business, is considered to be one of the premier high performance aftermarket manufacturers of racing engine products. “Our company started life as a job shop foundry in the 60’s, says Greg Brotherton.
Where is brodix located?
Mena, AR
Brodix, Inc. is located in Mena, AR, United States and is part of the Motor Vehicle Parts Manufacturing Industry.
How good are 882 Chevy heads?
The 441 has a reputation as a good-flowing head among the production 76cc chamber heads. In this particular case, it lost out to the 882 head, but overall it’s a decent head that responds well to pocket port work and larger 2.02/1.94 valves….
| GM 882 IRON | |
|---|---|
| Port: | 151 cc |
| I Flow @ 0.400: | 203 cfm |
Are all SBC heads interchangeable?
One thing to keep in mind, the Gen-1 and LT-specific heads are not easily interchangeable. Each will physically bolt up to the other engine, but the water passages don’t line up. The exhaust ports and exhaust manifold-bolt holes are in the same location.
How much HP can a Dart Little M block handle?
A little m will handle a 1000hp fine. Im making that or damn close to that on a stock 010 casting 350 block. Its pushing the limit for sure but its doable.
What does SHP mean on a Dart block?
Special High Performance
Designed for high performance and medium duty applications, the SHP (Special High Performance) block is the ideal starting point for hot rodders, drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts.
Where are profiler heads made?
All American Aluminum 23° SBC Racing Heads Featuring powerful port designs that are packed with air speed and unbeatable, made in the U.S.A., casting technology.
What kind of cylinder head does a brodix use?
Brodix offers the Track 1 Series Small Block Chevy Aluminum Cylinder Heads in a variety of configurations that are ready to bolt-on and Dominate! The Track 1 cylinder head has a 221cc intake port and a 64 or 67cc combustion chamber.
How big is the combustion chamber on a brodix track 1?
The BRODIX Track 1® has a 221 cc intake port and a 67 cc combustion chamber. This head was designed for the drag or oval track racer who wants a lighter weight cylinder head that can make a significant difference in horsepower.
How big is the intake port on a brodix?
Spec. heads are a popular part of the BRODIX arsenal. We offer spec. heads for Chevy, Dodge, and Ford depending on your application. 90º V-6 heads BRODIX has to offer include 194 cc, 210 cc, and a 221 cc intake port sizes.
What kind of iron is used in brodix blocks?
BRODIX now offers small block Chevrolet compatible cast iron blocks to enhance your racing programs. Proudly made in the USA, these blocks feature premium iron alloy, priority main oiling, a choice of a 4.000 or 4.125 bore size, as well as numerous other features.