What is a barge roll?
Barge roll is an original-style, rounded ‘barge roll’ capping used to finish off non gutter edges on roofing. It adds a stylish touch and suits many different architectural styles. The cruves and shadowing of Barge Roll add an element of visual interest not common on modern roofs.
What is a barge roofing?
Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
What is barge Moulding?
Barge Mould – Zincalume – 2.4 Mtr (6Ft) This ridge capping is a roofing flashing which is used to finish off any gable roof and adds an attractive finish to your roof’s ridge line. Ridge Capping is essentially used on domestic buildings with corrugated COLORBOND® Steel roof sheets.
What is a garage barge?
Barge Capping, Barge Flashing for Sheds, Garages, Homes, Cabins & Carports. Barge Flashings seal that gap between the top of the wall sheeting and the side edge of the roof cladding. They usually sit a few ribs back onto the roof and come down the wall between 7cm and 15cm depending on design.
What is the difference between barge board and fascia?
Bargeboards and fascia boards are essentially the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Bargeboards run diagonally and are located at the gable end of a property.
What is the difference between a fascia and a barge board?
Where is the barge on a roof?
For the uninitiated I had better explain that the “barge” refers to a roof/side wall junction where the wall extends up just above the roof and is covered with a band of concrete.
Which is the best barge capping for roofing?
Square Barge Capping provides a neat finish and can be ordered in a range of sizes. Roll Barge Capping has an attractive curved edge that blends corrugated roofing. Whether you want to install it yourself or require assistance, we are here to help. Contact us for pricing and further details today.
What kind of sheeting does a roll barge use?
Roll barges have a curved edge that creates a traditional form that blends with corrugated sheeting. Check with your state to see the styles available.
What are the different types of barge covers?
The hoppers may be covered or open. Covers provide protection of cargos from outside elements. Covers may be roll-top (telescoping), or lift-off (stacking) type. These are deck barges with cargo bins and open hopper type barges, both having stabilizing bulkheads in the cargo compartment.
What kind of barges are used for oil drilling?
These are deck barges with cargo bins and open hopper type barges, both having stabilizing bulkheads in the cargo compartment. These barges are used at oil well drilling sites to contain and transport any liquids and (shale) cuttings produced by the drilling operation that cannot be discharged overboard because of environmental considerations.