What Honda has the 40 40 prop valve?

What Honda has the 40 40 prop valve?

Honda Civic Acura Integra 4040 Proportioning Valve 40/40 Prop Valve GSR Ef9 SI.

What is a 40 40 valve?

Brake proportioning valves mange braking pressure between front and rear brakes. This item is a 40/40 valve, commonly used when deleting ABS from the braking system. Replaces the ABS pump in order to retain the correct brake balance between front and rear disc brakes.

How does an adjustable proportioning valve work?

Most adjustable brake proportioning valves are very simple devices designed to fit between the master cylinder and the rear brake line. The valve offers a range of adjustment that decreases master-cylinder pressure down to a preset minimum. Most valves reduce the master-cylinder pressure by turning the valve clockwise.

Can you adjust a proportioning valve?

You’ll want to have around 60-70% of the braking on the front, so adjust the Valve clockwise to increase rear brake pressure and counterclockwise to reduce rear brake pressure. …

How do I fix my ABS light on my Integra?

This is the procedure I have been using.

  1. Short the service check connector (under the glovebox, same one shorted to check engine codes).
  2. Depress the brake pedal.
  3. Turn the ignition switch ON (II) while keeping the brake pedal depressed.
  4. After the ABS light goes OFF, release the brake pedal.

Can you bench bleed a master cylinder with the proportioning valve?

Master cylinders MUST be bench bled outside the vehicle and without any other components attached. This means that if a new master is equipped with a booster, proportioning valve and plumb lines attached, they must all be removed prior to bench bleeding.

What are the symptoms of a bad proportioning valve?

First, you might notice your car is taking a nose dive when you suddenly apply the brakes. Then your car may not stop fast enough. If your rear wheels lock up easily, especially when you drive on wet surfaces, it is a good sign your proportioning valve is going bad.

Will disconnecting the battery clear ABS codes?

Will disconnecting a battery reset abs light? – Quora. Yes it will reset the abs light. The only issue is the abs module is tested every start up.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top