How do you reset the computer on a 2010 Chevy Silverado?
Remove the nut off the negative battery cable with a socket set or wrench. Slide the cable off of the battery and put it aside. Turn the headlight switch to the “on” position to drain the ecm of any remaining power. Wait at least 10 minutes, then turn it back to the “off” position.
Are 2010 Silverado keys chipped?
One Transponder chip key for 2010 Chevrolet Silverado – brand new, aftermarket (NO GM logo). This key must be professionally cut when received by a local automotive locksmith (click here for Locksmith Search ) or hardware store.
How do I program my Chevy Silverado key fob?
On your Chevy key fob, press and hold the “Unlock” and “Lock” buttons simultaneously until you hear the door locks engage and disengage again, indicating that you have successfully programmed your key fob. Re-insert the newly programmed key into the ignition in the “On” position to end the programming sequence.
How do I program my Chevy Silverado key?
Press and hold the “Lock” and “Unlock” buttons on your Chevy key fob simultaneously. Once you hear the door locks engage and disengage again, you will know that you have successfully programmed your Chevy key fob. Insert your newly programed key into the ignition and turn to the “On” position.
How do I reprogram my ECM Chevy?
Switch to programming mode Check if the vehicle OBDII interface is connected correctly. Switch on the ignition, but do not start the engine yet. Select Discover Vehicle from the Tools menu, then select Program Engine ECU when the window pops up and click OK. Select ENGINE ECU Program to enter programming mode.
How do you program a key for a 2010 Chevy Silverado 1500?
PRESS and HOLD the Trip Odometer Reset Button for 3 seconds until “REMOTE KEY LEARNING ACTIVE” displays. Vehicle is now in Programming Mode. PRESS and HOLD LOCK and UNLOCK buttons at the same time on the first remote for 15 seconds. The vehicle will emit a sound indicating successful programming of the remote.
What year did Chevy start using chipped key?
1997
General Motors Chip Keys. GM has first used transponder chip keys in 1997, but were slow to phase the technology in. Today, GM uses transponders on most of their models.