Will a 350 bolt up to a 700R4?
Yes, they bolt right in. Better if your th350 is a longtail (truck) tranny. That way you wont need another driveshaft.
How strong can a 700R4 be built?
In the process, we kept digging deeper into the world of 700s and discovered several more things that can be done to the R4, as well as things that shouldn’t be done. For example, Team Ramco’s “Flashman” Sharrar says that they can be built to withstand up to 850 hp and 600 lb-ft of torque.
Can I rebuild my 700R4 transmission?
You’ll need a transmission overhaul kit that includes all new clutches, steels, seals, and gaskets like the 700R4 Pro-Super rebuild kit we got from TCI Automotive. If your core tranny is really worn, you may need some “hard parts” like gears, drums, or even a pump that could add big bucks to the cost!
What year 700R4 is best?
If you locate more than one of these transmissions, it is best to select the later model TH700R4. Design improvements were constantly added throughout the years it was offered. Generally, 1987 and up TH700R4s or 1990-’93 4L60 units are the most desirable.
Will a 700R4 torque converter fit a TH350?
In a word, NO. 7004r’s use a lockup converter. It’s a totally different converter than TH350 uses.
How much longer is a 700R4 than a TH350?
Length And Weight The TH350’s case length is 21 5/8 inches. Depending on the tail shaft housing, its overall length can either be 27 5/8 or 30 5/8 inches. The 700R4’s case length is 23 3/8 inches and its overall length is 30 3/8 inches.
How much horsepower can a 700R4 handle?
The Street/Strip 700R4 is good for about 550 hp maximum, but with the HD input drum it is good for about 625 hp max.
Can you run a 700R4 without a computer?
To run a 700-R4 trans behind a carbureted engine without a computer, at the very least the TV cable must be hooked up to the carburetor and properly adjusted. Not just a simple kickdown cable like your TH350 analogue, the TV cable controls line pressure and shift points.
How much does a new 700R4 transmission cost?
700R4 Transmission – $1,595| 5-Year Warranty.
Can I replace a 700R4 with a 4L60E?
No 700R4 transmissions were ever controlled by the ecm. The lockup function is grounded with the ecm, but not the shift points like the 4L60E that replaced it. Any 700R4 will work in any application.
Can you run a 700R4 without a TV cable?
There are no TV cable, mechanical speedometer drive, or governor provisions. To run a 700-R4 trans behind a carbureted engine without a computer, at the very least the TV cable must be hooked up to the carburetor and properly adjusted.
Is there a rebuild kit for the GM 700R4?
The Monster-In-A-Box transmission rebuild kit for the 700R4 is available for GM vehicles. Found in this kit are all the parts you need to make your transmission a real Monster. It comes as a performance Mega package and also has a SS variant for those needing a higher horsepower and torque rating.
Is there a 700R4 3-4 power pack kit?
The 3-4 Power Pack is a multi disk design with sixteen friction surfaces. The 3-4 clutch is the weak point on 700R4 transmissions. This kit will give you a 33% larger clutch apply area on the 3-4 clutch with high performance Red Eagle clutches and Kolene steels to boot. This kit is custom built for PATC by Alto.
Is the 700R4 transmission part of the Hydramatic series?
This transmission is part of the Turbo-Hydramatic series and also known as: 700R4, 4L60, 700-R4, TH700-R4, MD8, THM700R4, THM700-R4. High quality kit. Thanks 3 of 3 customers found this helpful.
What kind of rebuild kit does Alto 700R4 use?
Alto 700R4 master rebuild kit with an 8 clutch Red Eagle Power Pack and full thickness Kolene steels for the 3-4 clutch. The 3-4 Power Pack is a multi disk design with sixteen friction surfaces.