What is difference L6 30P and L6-30R?

What is difference L6 30P and L6-30R?

L6-30P is a 208-240v single-phase 30 amp twistlock Plug. L6-30R is a 208-240v single-phase 30 amp twistlock Receptacle.

What is an L6 30 plug?

NEMA Locking L6-30 male Plug power cords. Capable of 30 Amps with 10 AWG cord and appropriate female connector. The plug offers the option of two Hot Lines, Neutral, Ground. The plug is inserted and twisted to lock in place.

Are thicker extension cords better?

Thicker cords can carry more power Aside from length, the thickness of the wires inside an extension cord dictate how much power it can safely carry. Thicker wires can carry more power over longer distances.

How do you wire a NEMA L6-30R?

Hold the NEMA L6-30R receptacle and view the terminal screws behind it. Wrap the red wire clockwise around the brass terminal screw; tighten the connection with a screwdriver. Wrap the black wire clockwise around the brass terminal screw; tighten the connection.

What are L6 30r used for?

The NEMA L6-30 is used for input on the domestic APC Matrix-UPS, Smart-UPS T models, and Symmetra RM 2-6kva UPS. The NEMA L6-30 receptacle is also used as an output receptacle for supplying 208 VAC in the Matrix-UPS, the Smart-UPS T models, and single phase Symmetra systems (Power Array, RM, LX).

What is the difference between Nema L5 and L6?

NEMA L5 connectors are a series of locking connectors with a maximum specified voltage of 125V. NEMA L6 connectors are a series of locking connectors used with circuits with a maximum specified voltage of 250V.

Is L6-30 single phase?

L6-30 is single phase and only has 3 prongs, 2 hot, 1 ground. 3 phase has 4 prongs, 3 hot, 1 ground.

What does L21 30 mean?

NEMA Locking L21-30 male Plug Three Phase WYE power cords. Capable of 30 Amps with 8 AWG cord and appropriate female connector. Locking plugs have the pins arrayed in a circular manner and operate at 120/208 Volts. The plug offers three Hot Lines, Neutral, Ground.

What happens if an extension cord is too long?

An improperly sized extension cord can cause a tool or appliance motor to burn out if allowed to run for too long. It can also cause a dangerous situation if it overheats.

How do you wire a NEMA plug?

A NEMA 6-15 plug uses a green screw and the letter “G,” found stamped into the plug’s body, to identify the ground terminal. The two unlabeled wire terminals are brass and connect to the live wires. Slip the ground wire’s hook over the NEMA 6-15 plug’s ground terminal screw, then tighten the terminal screw.