What gear ratio does a Rubicon have?
In contrast, the regular Rubicon uses a 4.11:1 rear axle ratio.
What axles come in a Rubicon?
Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio. The width of the axle shafts is 1.31 inches. Rubicon models also come with an electronically lockable differential for optimal traction while in 4WD.
What gear ratio does a 2016 Rubicon have?
Jeep Wrangler Rubicon Hard Rock Edition A 4.10 axle ratio, front and rear, is standard as are Tru-Lok locking differentials. With a six-speed manual transmission, the Wrangler Rubicon Hard Rock edition has an impressive crawl ratio of 73.1:1 that makes it a breeze to negotiate any obstacle.
What gear ratio is in a 2017 Jeep Wrangler Rubicon?
4.0:1
The Wrangler Rubicon model features heavy-duty Dana 44 front and rear axles and a Rock-Trac NV241 two-speed transfer case with a 4.0:1 low-range gear ratio.
What axles are in the 2021 Rubicon?
Wrangler Rubicon model features Dana 44 front and rear heavy-duty axles, enhanced off-road rock rails and the Rock-Trac NV241 two-speed or optional full-time transfer case with a 4:1 low-range gear ratio.
How do I find my Jeep axle ratio?
So an easy way to determine your actual gear ratio is to check the tag attached to the differential cover by the cover bolts. On the tag there should be some numbering such as 3.54 or 3.73, either of those numbers will give you the stock axle ratio.
How much wider are Rubicon axles?
Also, a JL Rubicon has axles that measure an impressive 68″ wide and that make them 1.50″ wider than a Sport or Sahara and a whole 2.50″ wider than a JK.
What gear ratio should I use for 35 inch tires?
4.56
Gear Ratio And Tire Size Calculator
| 3.31 | 4.56 | |
|---|---|---|
| 34″ | 2126 | 2929 |
| 35″ | 2065 | 2845 |
| 36″ | 2008 | 2766 |
| 37″ | 1954 | 2692 |
Do all rubicons have Dana 44?
All four-door JK Wrangler original owners do have Dana 44s under the rear end. All Rubicon JL owners have a Dana 44 front and rear axle. However, these aren’t your father’s Dana 30, 35, 44 axles though as Dana has made these stronger and lighter than any other generation..
What gear ratio is a Dana 35?
Dana 35 3.08-5.13 Ratio.
What’s the gear ratio on a Wrangler Rubicon?
Dana 44: These are the beefier axles found on the rear of all Wrangler models now with either a 3.21 or 3.73 gear ratio. They have a ring gear diameter of 8 ½”. Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio.
What’s the axle ratio between a Rubicon and a Sahara?
Axle Ratios: A 3.21 axle ratio is standard for the Sahara, which is lower than the 4.10 axle ratio for the Rubicon. Front Axles: While both the Sahara and Rubicon have the same rear axles, the Rubicon is equipped with a Dana 44 axle in the front as well. The Sahara has a standard Dana 30 solid front axle.
What kind of rear axle does the Jeep Rubicon have?
Rear Axles: Both the Rubicon and Sahara have Dana 44 heavy-duty rear axles, but they have different front axles. Tops: A black Sunrider Soft Top comes on both the Rubicon and Sahara, although hardtops are also available in the body color or black.
What’s the gear ratio on a Dana 44 Wrangler?
The width of the axle shafts is 1.13 inches. Dana 44: These are the beefier axles found on the rear of all Wrangler models now with either a 3.21 or 3.73 gear ratio. The Dana 44 ring gear size is 8 ½ inches. Rubicon models come standard with a 4.10 rear gear ratio and also use a Dana 44 axle in the front with either a 3.73 or 4.10 gear ratio.