How do you measure the radius of a guitar neck?
The radius should be listed in the Tech Specs section. If you look closely at the neck of your guitar, you’ll notice a slight arch between the high and low E strings. Manufacturers refer to this arch as the radius.
How do you find the radius of a fretboard?
How to measure the fretboard radius
- Find the guitar radius gauge that matches the arc (or radius) of your neck.
- Use a ruler graduated in 32nds or 64ths of an inch to measure the height of the top and bottom E strings.
- Set the gauge on top of the strings next to the bridge.
How heavy is a Peavey T 40?
about 10 1/2 pounds
The T-40 bass showed up the same year as the matching guitar. It weighed in at about 10 1/2 pounds, and had all the features found on the guitar, along with a long scale neck.
What is the radius on a bass guitar?
The fingerboard radius is the measure of the arc of the fingerboard across its width. You don’t have to look too closely at most electric guitar and bass fingerboards to see that few if any of them are truly flat; most of them have a slight convex curvature across their width.
What is guitar neck radius?
Fingerboard radius is the curvature of the fingerboard across the neck, from the lowest string to the highest string, and just like the radius of a circle, it can be described by a number. For example, if you’ve ever seen the specs for an electric guitar neck, you might have read 7.25″ as the radius.
What is the radius of a PRS neck?
| Manufacturer/Brand | Model | Fretboard Radius |
|---|---|---|
| PRS | Most | 10-11.5″ |
| PRS | Custom 24 | 10″ |
| PRS | Santana | 11.5″ |
| Rainsong | Most | 20″ |
What is neck radius?
Fingerboard radius is the curvature of the fingerboard across the neck, from the lowest string to the highest string, and just like the radius of a circle, it can be described by a number. The exact shape of that arc, from rounder to flatter, is expressed numerically in inches or millimeters.
What guitar neck radius is best?
A rounder radius of 9.5 to 10 inches is popular for open position chords. A flatter radius of 12 to 16 inches is popular for guitar soloing and bending notes. A compound radius offers both, starting rounder in open position and flattening out as you move higher up the neck.
Can you change the radius of a guitar neck?
So it is a bad idea to re-radius a neck. If you tried to go to a 12″ radius from a 7.5″ it would take so much wood off the fretboard it may ruin it altogether. You can put big frets on a fretboard and flatten them out for an effective radius change but that is another story for later. Just get another neck.