What causes no spark to the spark plug?

What causes no spark to the spark plug?

Loss of spark is caused by anything that prevents coil voltage from jumping the electrode gap at the end of the spark plug. This includes worn, fouled or damaged spark plugs, bad plug wires or a cracked distributor cap.

Why does my boat motor have no spark?

Engines with no spark or intermittent spark on one bank can be caused by a faulty stator. Nestled in with the stator under the flywheel is the trigger (or timer base).

Can a crankshaft sensor cause no spark?

A bad Crankshaft Position sensor is a common cause of no starts. The signal from this sensor goes to the PCM or ignition module that switches the ignition coil(s) on and off. In ignition systems with a single coil and distributor, a bad coil or a cracked distributor cap or rotor can prevent the spark plugs from firing.

Can a crank sensor cause no spark?

Will the stator cause no spark?

Without a stator, your motorcycle will not get any spark at all as your battery is not capable of supplying the appropriate power levels to generate a spark. As a result, if your stator is going bad your motorcycle will run very poorly. Eventually, your stator can prevent your motorcycle from starting at all.

What sensors can cause no spark?

No spark due to a bad crank position sensor, a faulty ignition module or PCM, a problem in the ignition circuit (ignition switch, antitheft system, wiring, etc.), a faulty park/neutral safety switch, a bad ignition coil (only on engines with a single coil ignition), or wet plugs or plug wires (did it rain last night.

Can timing cause no spark?

If the timing belt slipped several teeth then the camshaft AND distributor rotor may both be retarded. If the rotor was too retarded then the coil can create the spark… but if the rotor isn’t on a dizzy cap terminal then you won’t get spark routed to the plug wire.