Why is my DStv remote blinking red light?

Why is my DStv remote blinking red light?

When using the remote : if there is one RED blink, the remote is already in “Standby Relay” or “Volume Relay” mode, but nothing has been programmed to that button, or there is in an error with the programming sequence.

How do I turn off the orange light on my DStv?

Since the light on DStv decoder comes up when you have an unread notification, the simplest way to fix it is by reading them. Open all these messages one by one and read the important information they have. Once you are done, press the back button on your remote to exit the mail section.

What is the standby button on DStv remote?

It automatically switches off (times out) when the programmed number of seconds has passed (the default is 3 seconds). To change modes, press and hold the INFO and BACK buttons. The remote will change to the next mode, with the STANDBY button confirming the change by giving 2 blinks in the colour of the next mode.

How do I change my DStv remote from 2 to 1?

To set the remote to mode 1: press and hold the i button for 3 seconds or until you see the green light blink on 1 (below the i button). If the green light blinks below BACK, the remote is in mode 2.

What do you do when your DStv remote stops working?

Reset DStv remote

1. Hold down both the ARC and Standby for about 3 seconds. During this step, the remote lights should change to amber.
2. Continue holding the ARC button as you release the Standby.
3. While you are still pressing the ARC button, dial 9499.
4. Now, release the ARC button to complete the reset process.

Why does my DSTV remote not work?

How do I know if the remote is broken? Press any button on the remote. If the green light does not blink (below INFO, BACK or both), the remote is either broken or needs new batteries. If you put in new batteries and the green light still does not blink when a button is pressed, you will need to replace the remote.

Why is my DStv remote not working?

Reset DStv remote Hold down both the ARC and Standby for about 3 seconds. During this step, the remote lights should change to amber. Continue holding the ARC button as you release the Standby. Now, release the ARC button to complete the reset process.

How do I fix the yellow light on my DStv decoder?

Press the reset button on the front panel of the decoder. Press on the standby button and hold it until you see a ‘dL’ on the display panel. Press on the tv/ audio button. Hold on to it until the word done appears and you would have fixed it.

How do I reset my DStv remote control?

What are the buttons on the DStv remote controller?

Another set of buttons you can find on the DStv HD decoder remote controller are the 4 Arrow buttons or simply called navigational buttons. These buttons helps you move through highlighted menus or scroll to any other available options etc. Like Loading…

What does standby do on a DStv remote?

DStv Remote (A5 model) 3 Name Description STANDBYAllows you to quickly put the DStv Explora into standby (or bring it out of standby). Quick tip:if you press and hold the STANDBYbutton, the DStv Explora will reboot.

Why is the green light on my DStv remote not working?

When you press any button on the remote and the green light does not blink as described above, the remote may need new batteries or is broken. If the problem remains unresolved upon replacing the batteries, you should consider it broken or at least problematic.

How do I know if my DStv remote is broken?

How do I know if the remote is broken? DStv TV link eye not working is a straightforward indicator of a broken remote. When you press any button on the remote and the green light does not blink as described above, the remote may need new batteries or is broken.