Does NBN cable need to be in conduit?
Any customer cabling required between the main building and an outbuilding, e.g. for additional outlets as shown for Service A in Figure 5 must be separate and distinct from the nbn™ lead-in cabling, i.e. it must use separate cable and conduit to the nbn™ lead-in cable and conduit.
What is NBN lead-in conduit?
A Lead-In for the nbn™ network is the physical network connection between your home and the nbn network at your property’s boundary. A Lead-In is usually installed underground within a trench unless aerial cabling is already being used within the street.
What size is NBN conduit?
20mm Telstra / NBN Conduit.
What is included in a standard NBN installation?
The standard NBN installation involves installing the utility and connection boxes as close as is practical to the existing telecommunications equipment inside and outside your home. If your existing phone connection runs from the street via an underground conduit, then the NBN installer will use the same conduit.
What is an NBN NTD box?
A Network Termination Device (nbn NTD), sometimes also known as a Network Termination Unit (NTD) or an nbn Connection Box is the device installed at your premises that your nbn connection plugs into from the nbn network, whether it be delivered by Fibre (FTTP), Copper (FTTN/FTTB), Hybrid Fibre Coaxial (HFC), Wireless …
Where do I put the NBN connection box?
Installation of the NBN equipment must: ✔ Be on the inside surface of an exterior wall or a wall which is easily accessible for cabling the fibre. ✔ Be near a dedicated power source or an appropriate, safe alternative ✔ Be in a safe location away from hazards, including busy areas where it may be knocked and damaged.
Who is responsible for installing NBN?
Your landlord can decide where the nbn™ equipment will be installed in your property, and may be present during the installation process. A landlord can also request the installation of nbn™ equipment as long as they pay for the service and agree to all terms.
Is nbn underground or overhead?
In March the following year, NBN Co declared: “if power is underground, our fibre is underground… If there is an aerial power distribution, we may have an aerial local fibre distribution.
What is an nbn NTD box?
Do you need a NTD for nbn?
There’s lots of new equipment that will connect your home or business to the National Broadband Network. But there’s no need to worry: NBN Co will install most of it for you. Still, it’s important to familiarise yourself with the Network Termination Device (NTD). We call it the nbn connection box.
Is nbn NTD a modem?
You subsequently plug your router or modem into the nbn NTD, which allows you to access the internet. When installed, the nbn NTD will be mounted on a wall inside your premise.
Do I need a technician to install my nbn?
Even if you have nominated a self-installation, an nbn technician will still be required to connect your nbn service and may need access to your premises. The nbn technician will try to connect your premises to the nbn network either off-site or at your property.
What are the minimum separations for NBN Co?
NBN Co minimum Premises Connection Device (PCD) separations: Minimum 250mm from services including: • Electricity, gas* or water meter enclosures • Water taps or downpipes Minimum 1.5m side clearance from gas cylinders* *Check with your local Authorities for their separations NTD Enclosure Ventilation Alert:
Is the NBN in control of new laws?
nbn has no control over new laws. nbn cannot and does not make any promises about the contents of new laws and how they will affect you. nbn has used its best efforts to prepare this document to provide you with an indication as to how installation of pit and conduit infrastructure may occur.
Can you use this document other than with the consent of NBN?
The recipient must not use this document other than with the consent of nbn, and must make their own inquiries as to the currency, accuracy and completeness of this document and the information contained in it. The contents of this document should not be relied upon as representing nbn’s
Why do you need a pit for NBN?
nbn requires pits for several distinct purposes including: managing connections between conduits housing fibre optic cabling and splice closures housing the Small Footprint Multiport (SFM) and Splitter Multiport (SMPs) required to connect End User Premises (EUP) to the LN