How do I reset my Genie scissor lift?
hold the button and turn the key switch to the ON position. hold the button and turn the key switch to the ON position. (O TO 10 SECONDS, 2 IS THE DEFAULT.
How do I know if my Genie scissor lift is charging?
Confirm the Charger Is Working Look at the scissor lift’s battery charger and verify its light is illuminated. Once a lift is fully charged, the light will typically turn green. At this point, the charger will automatically shut off, too.
Why is my scissor lift not working?
Step 1: Check the power supply to your lift (including all cables, the actual power switch and all of the fuses). If you hear a clicking noise, the velocity fuse is locked. Step 4: Check the continuity of the coil; if it isn’t working, your scissor lift could be experiencing a problem with its solenoid.
What does OL mean on a lift?
When an overload event occurs, the Genie Smart Link platform controller will indicate -OL-, an alarm will sound and machine motion will stop. In the event the scissor lift is overloaded, weight must be removed from the platform to resume operation.
Can you use a scissor lift while charging?
It is important to note that it is possible to use your scissor lift whilst the battery is being charged. All you need to do is pull the red emergency shut-off button out and have a helper guide the extension cord away from the wheels whilst the equipment is moving.
How much does Genie rental lift cost?
The average genie lift rental rates range from $200 to $400 per day, while weekly rates range between $800 and $1,500. Monthly rental is around $2,000 to $3,500. Short-time requirements are also allowed and would typically cost $20 to $30 per hour . Below are the estimated rental rates for the Genie aerial lifts.
Where are Genie scissor lifts manufactured?
After moving to the manufacturing facility in Redmond , Genie introduced the first Z-boom in 1984. In 1993, Genie introduced the IWP. The company followed up that introduction with the addition of scissor lifts in 1997, trailer-mounted boom in 1998 and rough-terrain scissor lifts in 1999. Also in 1998, Genie expanded its Washington state manufacturing footprint to Moses Lake .
What is a Genie boom lift?
The Genie boom lift operates a self-leveling platform which rotates 90 degrees to either side on non-jib models. A tight turning radius with zero tail swing on most models ensures easy maneuverability through narrow aisles and standard sized doors.