How do I reset my Scotsman ice maker?
Reboot Your Scotsman Ice Machine On the control panel, press the “off” button and power down the machine. Wait about 10 seconds and then press and hold the “on” button for a couple of seconds. This will turn the machine back on and initiate the reset process.
What does Code 2 mean on Scotsman ice machine?
Diagnostic Codes 2 – Long harvest time. Shutting down. 2 (flashing) – Retrying long harvest cycle. 3 – Water filling slowly.
Why is my Scotsman ice machine not making ice?
Low room temperature – Most Scotsman ice makers won’t produce ice when the temperature is below 55 degrees Fahrenheit. Make sure the machine is in a room or setting that is warmer. Low refrigerant charge – Low refrigerant charge can impede ice production.
What does short freeze mean on ice machine?
On a Scotsman, Code 8 means there’s a short freeze cycle. This is caused by: Improper water flow Water is splashing onto the ice thickness sensor due to scale buildup Misadjustment of ice thickness sensor A broken, bent, or dismounted ice thickness sensor. To clean the spillway surface, see the below directions.
What would cause an ice maker to stop working?
Cause: A common cause for a clog is frozen water in the line. Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).
What does sump full mean?
Long Freeze Cycle – Prodigy • No water due to False Sump Full signal. – Sump Full light is on, but water level is low. – Cause is a shorted water level sensor.
Why is my ice machine not making ice?
If your ice maker isn’t producing ice at all or is producing crescents or cubes that are smaller than usual, it’s typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: Locate and replace the water filter.
How long is the freeze cycle on a Scotsman ice machine?
Refrigeration system pressures: High Side (discharge) End of Freeze cycle 150 – 160 psig Harvest cycle 100 – 125 psig Low side (suction) End of Freeze cycle 10 – 11 psig Harvest cycle (maximum) 90 psig B. Freeze cycle time 20 minutes C.
Is there a warranty on a Scotsman ice machine?
The use of parts that are not Scotsman Genuine Service Parts may negatively impact performance of your ice machine. Scotsman’s equipment warranty will not cover any damage resulting from the use of any part that is not a Scotsman Genuine Service Part.
Where to troubleshoot a Scotsman ice maker in Utah?
In Salt Lake City and the surrounding communities of northern Utah, Kimball Appliance Parts & Service has a staff of specialists who are trained to provide professional troubleshooting and repair of all Scotsman appliances. We can quickly identify the problem and make the necessary repairs to get you back in business.
Why is the bin full light on on my Scotsman ice machine?
Misleading “Bin Full” light – If the “Bin Full” light is on but the bin isn’t full, the ice sensors might need to be cleaned or replaced by a technician. A faulty thermistor usually causes the bin to fill with too much ice.
Where can I find Scotsman parts and distributors?
A complete list of Scotsman service parts and distributors is available on the Scotsman web site. Your complete resource for all things Service, Parts, Manuals, Bulletins, Find your local service dealer.