How do I connect my Linksys router to my modem?

How do I connect my Linksys router to my modem?

2 Connect to Modem by Cable/Wire

1. Acquire an Ethernet cable.
2. Take one end of the cable and plug it into the Internet (or WAN) port on the rear of your router.
3. Take one end of the cable and plug it into an available Ethernet (or LAN) port on the rear of your modem.

How do I install Linksys router without CD?

Setting up your Linksys Wi-Fi Router without a Setup CD

1. Go to the Linksys Support Site.
2. Click on the DOWNLOADS / FIRMWARE button.
3. Select the Hardware version of your device.
4. Locate the Setup Software for your computer and click Download.
5. Save the Setup Software and select a location on your computer to save the file.

How do I connect my Linksys router to my computer?

You need to use a standard CAT5 Ethernet cable to connect your computer to the router. Connect one end of an Ethernet cable to the Ethernet port on the computer and connect the other end to any of the numbered ports at the back of the router.

How do I install a new wireless router?

How to Install a New Router

1. Check Your Internet Connection.
2. Place the Router.
3. Connect to Power.
4. Connect to Your Internet Source.
5. Access the Router’s Web Interface.
6. Connect Wired Devices.
7. Connect Your PC or Device to Wi-Fi.

How do I connect my wireless router to modem?

Connect one end of one Ethernet cable into the back of the modem, then connect the other end into the Wide Area Network (WAN) port on the router. Connect the router power cord into an electrical outlet, then connect the other end to the router.

How do I setup my Linksys router without a modem?

If your Internet connection is through satellite, T1 or fiber optic that doesn’t have a modem, connect the existing Ethernet cable to the yellow Internet port of the router. Click Next. NOTE: Linksys Connect will then start configuring your network.

How do I install a Linksys wireless adapter?

For a USB adapter — Plug the USB adapter to any available USB port of your computer or laptop. For a PCI adapter — Open your computer’s case and locate an available PCI slot. Slide the adapter into the PCI slot. PCMCIA adapter — Locate and insert the adapter in an available PCMCIA slot on the side of your laptop.

How do I fix my Linksys Internet connection?

What can I do if my Linksys router is not working?

1. Reboot your router. Unplug your router from the power and check the power supply.
2. Release and renew the IP addresses.
3. Clone the computer MAC.
4. Reset Linksys to its factory default settings.

How do I Reset my Linksys E4200 to stock firmware?

You can always revert back to stock firmware. Download the latest E4200 firmware from the Linksys website. Disconnect all cables and wireless clients. Perform a 30/30/30 reset on the device. Login and select the stock firmware file and flash, make sure to select “reset to defaults” on the drop down menu when flashing.

Which is the best Flash build for Linksys E4200?

Open router GUI (192.168.1.1) in Web browser on PC. Do NOT use a “nv60k” build for the initial flash; only use a trailed build, such as above. 21676 is a stable, recommended build for the E4200, but only use the mini version, since larger versions have the dangerous Heartbleed vulnerability.

Can a Linksys E4200 be upgraded to DD-WRT?

The E4200 uses nv60k builds, do NOT flash nv64k nor generic builds. To upgrade stock firmware to DD-WRT, use the Flashing procedure below. Only use trailed builds (with E4200 in the file name) to avoid bricking. AFTER initial flash, only use trailed OR nv60k builds – NOT nv64k nor generic builds.

How do I install DD WRT on my Linksys router?

To install DD-WRT, perform these steps from the stock Linksys GUI: Read all of the required Peacock announcement . Disconnect any Ethernet cables from router and PC, and disable PC wireless. Reset the router. Connect Ethernet cable from a LAN port (not the Internet port) of the router to PC doing the flash.