What is NanoStation M2 used for?

What is NanoStation M2 used for?

The NanoStation®M can be deployed for Point-to-Point (PtP) bridging, wireless connectivity to a video surveillance system, or use as an airMAX® CPE. With software-enabled PoE output, the secondary Ethernet port can power an external device, such as a PoE security camera, for seamless IP video integration.

What is Ubiquiti Loco?

The Ubiquiti NanoStation Loco M2 MIMO Base Station features a panel antenna and dual-polarity performance, making it ideal for Point-to-MultiPoint (PtMP) applications requiring high-performance CPE devices, all within a sleek form factor. Ubiquiti NanoStation Loco M2 MIMO Key Features.

How does the ubiquiti NanoStation work?

We install a wireless device (either a Ubiquiti Nanostation M5 or Ubiquiti Nanostation Loco M5 depending on location) on the outside of your premises which then points to our network of repeater stations. This then passes the signal back to our core router, which then passes it to the internet.

What is the range of NanoStation Loco M2?

to 10km
Ubiquiti Networks LOCOM2 Overview The NanoStation locoM2 Indoor/Outdoor airMAX CPE from Ubiquiti Networks is a cost-effective and reliable solution for high performance. It features up to 10km of range performance, 25+Mb/s of throughput performance, an intuitive AirOS by Ubiquiti.

What is the range of NanoStation Loco m2?

How do I connect my NanoStation M2 to my router?

Using Ethernet cables, connect the following:

1. Connect the LRS gateway to the “Secondary” port on the router.
2. Connect the “Main” port on the router to the “POE” port on the power adapter.
3. Connect the “LAN” port on the power adapter to your internet source (optional)

How big is the enclosure for The Nanostation Loco?

Enclosure Size 29.4 x 8 x 3 cm Weight 0.5 kg Max Power Consumption 8 Watts Power Supply 24V, 1A PoE Supply Included Power Method Passive PoE (Pairs 4, 5+; 7,8 return) Operating Temperature -30° to 75° C Operating Frequency M2 2403 MHz – 2475 MHz M5 5470 MHz – 5825 MHz Networking Interface 2 10/100BASE-TX Ethernet Ports NanoStation Loco M

What does the lan2 led on The Nanostation m2 mean?

LAN2LAN/Secondary Ethernet The LAN2 Ethernet LED (on NanoStation M2/M5 only) will light steady green when an active Ethernet connection is made to the Secondary Ethernet Port. Signal These LEDs display the signal strength. 3 Typical Deployment Typical Deployment

What are the models of The Nanostation m?

Models: NanoStation M2/M5 NanoStation Loco M2/M5/M900 1 Introduction Introduction Thank you for purchasing a Nanostation M series product. This is a point-to-point CPE wireless device. This Quick Start Guide is for use with the following models:

How big is a nanostationm2 / M365 / M5?

NanoStationM2/M3/M365/M5 Dimensions 294 x 30 x 80 mm (11.57 x 1.18 x 3.15″) Weight NSM2/NSM5 0.4 kg (14.11 oz) NSM3/NSM365 0.5 kg (17.64 oz) Gain