What size pocket door frame do I need for a 32 inch door?
For example, a 2-foot 8-inch door (32 inches) the rough opening needs to be 65 inches. The height of the rough opening off the rough floor surface is usually 84.5 inches.
How much does a 32 inch pocket door cost?
Pocket Door Cost by Size
| Door Size in Inches | Door Size in Feet | Average Cost (Material Only) |
|---|---|---|
| 28 inches | 2’4” | $160-$500 |
| 30 inches | 2’6” | $300-$800 |
| 32 inches | 2’8” | $350-$900 |
| 34 inches | 2’10” | $400-$1,200 |
How do you measure pocket door hardware?
Double the width of the desired door, or pair of doors, to determine the wall space that’s needed to install the pocket door frame. For example, 48 inches is needed to install the frame for a 24-inch pocket door, and 64 inches is need to install the frame for a 32-inch pocket door.
What sizes do pocket doors come in?
Pocket Door Dimensions
| Size | Overall dimension | Door panel |
|---|---|---|
| Small | 66 1/3 inches x 82 ¼ inches | 32 1/6 inches |
| Medium | 99 5/8 inches x 82 ¼ inches | 24 3/16 inches |
| Large | 146 7/8 inches x 82 ¼ inches | 36 inches |
| Extra large | 162 5/8 inches x 82 ¼ inches | 39 15/16 inches |
What is the rough opening for a 32 inch door?
Measurements For Rough Opening
| Rough Opening Width | Rough Opening Height | Door Size to Order |
|---|---|---|
| 29.75″ – 31″ | 81.5″ – 83″ | 28″ |
| 31.75″ – 33″ | 81.5″ – 83″ | 30″ |
| 33.75″ – 35″ | 81.5″ – 83″ | 32″ |
| 35.75″ – 37″ 37.75″-39″ | 81.5″ – 83″ | 34″ 36″ |
What is the rough opening size for a 30 pocket door?
The rough opening width should equal two times the door width plus 1” (25.4mm). For example, a 30” (76.2 cm) door multiplied by two equals 60” (152.4 cm) plus 1” equals 61” (154.94 cm) rough opening width.
How much wall depth do you need for a pocket door?
A pocket door requires a “sleeve” inside the wall to retract into. For a traditional 32-inch-wide interior door, you’ll need at least 66 inches of linear wall space: 32 inches for the door and the rest for the housing.
What is the actual size of a 32 inch door?
31-3/4″
2’8″ (32 Inch) Door Width (Actual Size 31-3/4″) by Door Closers USA.
How wide is a pocket door?
Average pocket door measurements range from 30″-36″ wide and 80″-84″ tall. Identify the position of any wiring or pipes running through the wall, to avoid cutting them Check the frame kit instructions for the size of the header you need, if it’s not included with the kit. Heavier doors might call for a longer header.
What are the dimensions of a pocket door?
Measuring for a pocket door is based on the size of the door opening, the wall area needed to install the frame and the width of the studs in the wall. Determine the size of a single door or pair of double doors that suits your purposes. Standard door widths range from 24 inches to 32 inches.
What is the rough opening for a pocket door?
The rough opening for the pocket door is the rectangle created by the wall studs. It’s a very specific height and width both called out in the written pocket door installation instructions. The rough opening is the foundation of your system.
What is a pocket door kit?
A pocket door kit allows a door to slide into a space inside the wall, as opposed to a hinged door which opens into a room.