How do I fix error 59 F0 on my HP printer?

How do I fix error 59 F0 on my HP printer?

Usually, for 59. F0, it is recommended to try resetting the toner and the fuser assembly. Reset the printer using the power switch, turn off the printer for a few minutes. Turn on the printer and wait for the HP colour jet printer to revitalise.

What is 59 fo error on HP printer?

This error happens when there is a problem in the internal motor of the printer. The main reason behind this error is the failure in transfer alienation. Transfer alienation failure means a situation where the ITB is stuck and cannot rotate.

How do I reset my HP ITB?

Now you can reset the New Transfer Kit setting At the control Panel, press the Home button. Open the “Administration” menu, then choose “Manage Supplies”. Select the “Rest Supplies” option, and then choose “New Transfer Kit.” Use the Down Arrow button to highlight the word “Yes”, and then press Ok to select it.

What is ITB on a printer?

HP Color LaserJet CP5225 and CP5525 Printer Series – Preparing Intermediate Transfer Belt (ITB) for Shipping. At times, it is necessary to ship an Intermediate Transfer Belt (ITB) that has been used in a printer for a period of time. Most often, this is because HP has requested the part be returned for evaluation.

Why is my HP printer in an error state?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

How do I reset my printer ITB?

4525 ITB Reset

1. Clean the New ITB sensor flag thoroughly with canned air and pull the flag toward you to make sure it swings freely.
2. Use a pen or paperclip to press in the center hole on the side of the new ITB while turning the white Alienation Gear clockwise. (
3. After a few turns the ITB reset flag will reappear.

What is ITB in a printer?

What happens when you reset a printer?

A factory reset will return your printer’s settings to what they were when it first came out of the box. This guide will help you reset your printer back to factory defaults.

What is Oobe reset HP printer?

If you’re ever tempted to do a OOBE (Out Of Box Experience) reset (available only via the service menu), you can lose your printer! You will be forced to reuse the setup cartridges to initialise the printer again and setup cartridges are not available for sales anywhere.

What causes 59.f0 error on HP printer?

The sensor flag/lever is stuck in the up position which causes the 59.F0 error: Just below is an image looking in with the fuser removed at the sensor flag/lever in the holder with the photo interrupter located on the left side (front of printer). The sensor flag/lever is in the down position

What causes hp CP4025, cp4525, cm4540 – 59.f0 error?

HP CP4025, CP4525, CM4540 – 59.F0 Error Description: This error is primarily caused by a transfer alienation failure in which the ITB is stuck and unable to rotate, the SR9 sensor (the primary transfer roller disengagement sensor) has gone bad or the fuser drive assembly has failed.

Why is my hp 4525 saying 59.f0?

When the flag/lever sticks or returns slowly the result can be a 59.F0 error. Below is a recommended suggestion to resolve this problem: Remove the fuser and on the left side (front of printer side) you can see the sensor flag holder (image #1 and #2 below)

Why do I get error 59 on my MFP?

59 errors are usually associated with motor errors. Having said that, I checked my Technician manuals for this product and the errors you are listing are not in the manual. This means that they are not common errors and because there are several it suggests a connection problem with the DC controller or a failed DC controller.