What is the command for privileged EXEC mode?

What is the command for privileged EXEC mode?

To enter privileged EXEC mode, enter the enable command. Privileged EXEC From user EXEC mode, enter the enable command.

What is privileged EXEC mode in Cisco?

privileged EXEC mode is the system administrator mode. In this mode configuration files can be read, the router can be rebooted, and operating parameters can be changed. global configuration mode is used to modify system-wide configuration parameters, such as routing tables and routing algorithms.

What command is used to enable the privileged mode to Global mode?

use exit command to enter into global configuration mode or use end command to enter into privilege mode.

What are some of the tasks that can be performed at the privileged EXEC mode?

Cisco Networking: Privileged EXEC Operating Mode

• cd: Change the current directory.
• clear: Resets functions operating on the device.
• clock: Allows you to change the system clock.
• copy: Copy a file from one location to another.
• debug: Turn on debug logging.
• delete: Removes a file from a file system.

Which prompt tells you that you are in the privileged EXEC mode?

Enable
To get into Privileged Mode we enter the “Enable” command from User Exec Mode. If set, the router will prompt you for a password. Once in Privileged Mode, you will notice the prompt changes from “>” to a “#” to indicate that we are now in Privileged Mode.

What command is used in privileged EXEC mode in order to reboot the switch?

Enable mode (privileged mode or privileged exec mode) — Allows the user to execute privileged commands, such as the reload command, which tells the switch to reboot the Cisco IOS.

Which EXEC mode allows the execution of configuration and management commands?

Privileged EXEC mode
Limited examination of router. Remote access. The User EXEC mode allows only a limited number of basic monitoring commands and is often referred to as view-only mode. The Privileged EXEC mode, by default, allows all monitoring commands, as well as execution of configuration and management commands.

Which CLI command is used to change from privileged EXEC mode to user basic EXEC mode?

From the Privileged Exec mode, enter the configure command. Type exit to exit to the Privileged Exec mode, or press Ctrl-Z to switch to the User Exec mode. From the Global Config mode, enter the interface command. Type exit to exit to the Global Config mode, or press Ctrl-Z to switch to the User Exec mode.

What is EXEC mode in Cisco?

User EXEC level allows you to access only basic monitoring commands; privileged EXEC level allows you to access all router commands. There are five command modes: global configuration mode, interface configuration mode, subinterface configuration mode, router configuration mode, and line configuration mode.

What happens when the exit command is entered in privileged EXEC mode?

If you press exit in privileged EXEC mode what happens? The session ends. How do you move from any of the sub modes of the global config to the mode one step above it? To move from any submode of the global configuration mode to the mode one step above it in the hierarchy of modes, enter the exit command.

Which of the following commands will allow you to enter privileged EXEC mode from the router prompt?

What is privileged EXEC?

User EXEC level allows you to access only basic monitoring commands; privileged EXEC level allows you to access all router commands. Privileged EXEC level can be password protected to allow only authorized users the ability to configure or manage the router.

How do I get into Cisco exec mode?

To enter global configuration mode, enter the configure command. From privileged EXEC mode, enter the configure command. To exit to privileged EXEC mode, enter the exit or end command, or press Ctrl-Z. To enter interface configuration mode, enter the interface configuration command. Similarly, you may ask, what is EXEC mode in Cisco?

What does privileged exec mean in Cisco IOS?

User EXEC level allows you to access only basic monitoring commands; privileged EXEC level allows you to access all router commands. Privileged EXEC level can be password protected to allow only authorized users the ability to configure or manage the router. From privileged EXEC level, you can access all the command modes.

How do I get into privileged exec mode?

To enter privileged EXEC mode, enter the enable command. Privileged EXEC From user EXEC mode, enter the enable command. disable command. To enter global configuration mode, enter the configure command. Click to see full answer.

What are the commands in the privileged command set?

The privileged command set includes those commands contained in user EXEC mode, as well as the configureprivileged EXEC command through which you access the remaining command modes. If your system administrator has set a password, you are prompted to enter it before being granted access to privileged EXEC mode.