How do I reset my Tunstall alarm?
Step 1 – Press and hold down the green cancel button until it bleeps (approx 5 seconds). The home unit announces ‘Programming mode’ and the red alarm button flashes slowly. Step 2 – Press and hold down the green cancel button again until it bleeps (approx 3 seconds).
How do you fit a lifeline?
Plug the white telephone cable into the ‘LINE’ socket on the back of the base unit. Connect the other end to your telephone socket. Plug the telephone adaptor into the base unit, using the labelled socket. Then, plug your telephone into the adaptor.
What is a GSM lifeline?
The Lifeline GSM is a home unit designed to automatically call a monitoring centre or designated telephone number (personal recipient) when it receives a signal from a personal radio trigger or Telecare sensor indicating that the user requires assistance.
What is a Tunstall system?
Tunstall Cognitive Care is an advanced system that brings together data from multiple sources, such as sensors, smartphones and wearables, and uses this insight to enable care to become more intelligent and person-centred.
What is a lift GSM?
A GSM unit enables an autodialler to operate via the mobile phone network without the need for a BT land line. When the emergency button in the lift car is pressed, a signal is sent to the GSM unit, which calls the outside emergency helpline via the mobile phone network.
Can you have a lifeline without a landline?
The Lifeline alarm comes with everything you need, so there is no need for additional landline sockets or splitters. If you have a phone plugged in already, you just unplug the phone, plug our alarm in and then plug the phone into the back of the alarm to keep using it as you always have done.
Why is my lifeline beeping?
The Lifeline unit will start beeping either because it has lost mains power or there is a disruption to the telephone line. To stop the beeping, push the green button twice in quick succession. Then please check that your phone line and power cable are connected to the Lifeline unit correctly.
Who owns Tunstall Healthcare?
Tunstall Group Limited
Tunstall Healthcare/Parent organizations
Who owns Tunstall Group?
EXDON 1 LIMITED
Tunstall Group Limited/Parent organizations
Can a Tunstall safe socket be used with Lifeline?
A Tunstall Safe Socket must also be used on all other telephone wall sockets to ensure the alarm can be generated if an extension telephone is in use. Step B– Plug the mains adaptor into the home unit socket labelled AC and then connect to the mains power. Note – Only the mains adaptor (part number XD5206005) can be used with the Lifeline GSM.
How does a lifeline VI home unit work?
Your Lifeline Vi or Vi+ home unit The Lifeline home unit is connected to the mains power supply and your telephone line. It enables you to generate a call for help if and when you need it by immediately contacting a monitoring centre who will be able to provide you with the assistance that you require.
Can a lifeline home unit work on a GSM network?
When operating over a GSM network, the home unit will not work unless there is satisfactory GSM availability. IMPORTANT– The Lifeline GSM is a safety product that needs to work in an emergency therefore ‘pay as you go’ SIM cards should not be used as they may run out of ‘talktime’ credit or unused credit may expire.
How do you cancel a lifeline alarm call?
Making an alarm call Press the red button on the personal radio trigger or red alarm button on the home unit. Cancelling an alarm call Wait 5 seconds (after the initial alarm button is pressed) and press the green cancel key. This in-built delay prevents false cancellation of an alarm call.