Can I use 2 Rams with different brands?
Your computer is likely to run fine if you mix different RAM brands, different RAM speeds, and different RAM sizes. However, if you are going to buy a new RAM stick, it would benefit you to just buy something that is compatible. So at the end of the day, yes you can mix RAM brands as long as you are careful.
Can I use 8GB and 16gb RAM together?
Yes, you can mix different size ram together. You’ll want to try to match the CAS latency, timings, and speed though!
Can I use 16gb and 4GB RAM together?
Its possible, but there is a fairly large chance it wont work properly. Only RAM sold in kits is guaranteed to work together. You can use a single stick by itself if you have to, it wont run in dual channel so the performance will be a little slower, but its not going to be any better using the 4GB stick alongside it.
Can I use mismatched RAM?
TLDR: Can I Use Different Brand and Size Ram Sticks Together? Yes, you can use different brand RAM sticks together, even if they don’t have the same size. However, using mismatched RAM modules may negatively affect the performance and stability of your computer for the reasons we describe in detail in this article.
Can I mix RAM with different Mhz?
You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. For example, for a DDR2 667MHz system you could add 800MHz modules, they will run at the 667 speed.
Is mixing RAM bad?
Can You Mix Different RAM Brands? In short, the answer to this question is: yes. No matter the brand, speed, and size of the RAM, you theoretically can get it to work on your system; though it may prove to be problematic. Also, depending on the setup & workload, you may not even notice a difference in performance.
Is it OK to have 3 RAM sticks?
To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.
Can I mismatch RAM?
There’s a prevailing misconception you cannot use different RAM sizes together or that you cannot mix RAM brands. The answer is Yes, you can mix RAM sticks and RAM sizes and even different RAM speeds—but mixing and matching RAM modules isn’t the best for system performance.
Can I use 2GB and 4GB RAM together?
As far as mixing size is concerned, the memory will work in what is called a “Flex Mode” – 2GB out of the 4GB and the present 2GB module which will run in Dual channel mode, while the remainder of the 4GB module (which is the other half of 4GB) will run in single channel mode.
Is it OK to mix different types of RAM?
Yes – it’s OK to mix. The more RAM you have, the more files can be cached over time and the more processes can sit resident in RAM for faster switching between tasks running at the same time.
Can you mix Ram brands?
Mixing Ram Brands. If you are going to buy new RAM, you can mix RAM brands. However, it will make your life easier if you buy the exact same type of RAM. You won’t have to do anything new and you aren’t putting your machine at as much of a risk. You want to ensure that each stick has the same timings, voltage, and CAS latency as well as specs.
Can you mix Ram?
You can mix RAM, it will go down to the most common denominator between the RAM speeds however using different brands or even kits can potentially cause issues with stability, but it is usually rare but not unheard of.
Can you mix memory brands?
In reality, mixing brands of DDR memory can cause problems in some situations. While each manufacturer is supposed to use the same standards, each one has their own spin on the DDR memory protocols. These minor differences can cause operational problems when you start mixing different brands. On the theoretical level, it is possible.