How do I fix error code P0014?

How do I fix error code P0014?

What repairs can fix the P0014 code?

1. Resetting the fault codes and performing a road test.
2. Replacing the oil and filter using the proper oil viscosity for the engine.
3. Repairing or replacing the wiring to the camshaft oil control valve for bank 1 exhaust camshaft.

Will an oil change fix P0014?

If you use a different viscosity oil you can cause a P0014 trouble code. Change the oil and filter using the recommended viscosity, clear the code and drive the vehicle. If the code doesn’t return, you’ve found the root cause.

Can I drive my car with a bad camshaft position sensor?

Yes, it is safe to drive with a bad camshaft sensor. However, the performance of your engine will not be as good and fuel consumption may increase. In some cases, the camshaft may need replacement if there are any other symptoms of failure on this component.

What are the symptoms of a bad camshaft position sensor?

If your vehicle idles roughly, stalls frequently, has a drop in engine power, stumbles frequently, has reduced gas mileage, or accelerates slowly, these are all signs your camshaft position sensor could be failing.

Where is the exhaust camshaft position sensor located?

The camshaft position sensor is always located near the camshaft, often at the top of the valve cover, but it can also be installed from the side of the cylinder head.

What are the signs of a bad camshaft sensor?

What will a bad camshaft position sensor do?

Poor Drivability A failing camshaft position sensor begins losing its ability to quickly transfer data. Mismatched fuel delivery and ignition timing, even if off by a few milliseconds, will cause your vehicle to sputter, accelerate poorly, lack power, stall or even shut off.

What is code P0015?

P0015 is the OBD-II generic code indicating the engine control module (ECM) has determined that the exhaust camshaft timing for bank 1 is more retarded than what the ECM has commanded it to be. The over-retarded timing condition can be during the advancing or retarding phase.

Why does my Chevy Trailblazer have a p0014 code?

Below, you’ll find some typical issues that cause P0014. Do be aware that this code can be thrown when there are oil pressure issues, low oil, or dirty oil. This is because the camshaft actuators use hydraulic energy to move. VVT uses camshaft actuators to adjust the position of the cam.

How much does it cost to repair a p0014 Chevy?

The cost to diagnose the P0014 CHEVROLET code is 1.0 hour of labor. The auto repair’s diagnosis time and labor rates vary by location, vehicle’s make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

When to throw the p0014 camshaft code?

Do be aware that this code can be thrown when there are oil pressure issues, low oil, or dirty oil. This is because the camshaft actuators use hydraulic energy to move. VVT uses camshaft actuators to adjust the position of the cam. When the camshaft timing will not return to a less aggressive profile after heavy engine load, P0014 will be thrown.

Where is Bank 1 on a Chevy Trailblazer?

P0014 affects bank 1, which is on the side of the engine where cylinder one occurs in the firing order. Typically, P0014 will cause quite a few noticeable symptoms in the Chevy Trailblazer.