How do I unpair my ecobee sensor?

How do I unpair my ecobee sensor?

Unpair the sensor in question from your ecobee thermostat by going into MAIN MENU > SENSORS, selecting the sensor, then tapping the trash icon and following the prompts. Remove the back cover from the sensor and remove its battery.

Why does my ecobee sensor keep going offline?

An ecobee sensor keeps disconnecting or registering as unavailable due to: Low battery. Static interference from other devices. Placement is too far from the thermostat.

How do you keep the ecobee sensor occupied?

For you to get accurate Ecobee Sensor unoccupied while sleeping readings, place your sensor at least five feet from the ground in such a way that it faces the bedroom. You can avoid areas where there is interference, such as near vents or fans. Similarly, direct sunlight can affect occupancy changes detection.

How do I reset my ecobee remote sensor?

1 Factory Reset

1. Remove the circular backing from the back of the sensor.
2. Remove the battery from the battery slot.
3. Gently lift the prongs in the middle of the battery slot with your index fingernail.
4. Place the battery back into the battery slot with the positive side facing down for 30 seconds.

What happens if ecobee loses WIFI connection?

The short answer is yes. Even without a Wi-Fi connection, your ecobee will still function as a traditional thermostat; it will engage your equipment as needed and maintain your comfort set points.

How do I calibrate my ecobee sensor?

From the thermostat, select: Menu > Settings > Installation Settings > Thresholds, and then choose Temperature Correction. This will allow you to adjust the thermostat and sensors’ overall temperature up or down according to your needs.

How do I recalibrate my ecobee sensor?

To Configure Temperature Correction

1. Press Menu on the main screen.
2. Go to Settings.
3. Then go to Installation Settings.
4. Select Thresholds.
5. Then select Temperature Correction.
6. Adjust the temperature reading to fit your needs.

How long does ecobee sensor stay occupied?

When you leave that room, the sensor will remain occupied for 30 minutes. This means that if you are moving around the house, the thermostat won’t be continually turning on and off. After 30 minutes of no movement, the sensor will become unoccupied. It will stay unoccupied until movement is detected again.

Are ecobee sensors sensitive?

The remote sensors have a horizontal range of about 120 degrees and a vertical range of about 25-30 degrees. They can detect motion up to 15 feet.

How does a room sensor work with ecobee?

Using Room Sensors with your ecobee can help you achieve a more balanced temperature throughout your home by minimizing hot or cool spots. Every time you pair a Room Sensor to your ecobee thermostat you’ll be asked which Comfort Settings (e.g. Home, Away, and Sleep) you’d like it to participate in.

How long does an ecobee thermostat sensor last?

Therefore, all sensors have to be within the range of the ecobee thermostat. The remote sensors run on battery power so they can be placed anywhere you like. The battery is a type for the old ecobee Room sensors is CR2032 (the little silver coin shaped batteries). It will run the sensor for 18-24 months.

Is the ecobee app compatible with smartthermostat?

Access their readings remotely with the ecobee app or the Web Portal. Room Sensors are compatible with SmartThermostat with voice control, ecobee4, ecobee3 lite and ecobee3. If you decide to upgrade or switch thermostats, you can unpair your sensor (s) from the old thermostat and pair them to the new one.

What happens when you change the comfort setting on ecobee?

Because each Comfort Setting might have an entirely different mixture of participating sensors, a sudden change from one Comfort Setting to another could result in a rapid rise or drop in average temperature. To avoid this, your ecobee makes the transition from one Comfort Setting to the next, gradually.