What shaped signs give instructions to tram drivers only?
The width taken up by trams is often shown by tram lanes marked by white lines, yellow dots or by a different type of road surface. Diamond-shaped signs and white light signals give instructions to tram drivers only.
Who follows diamond signs?
Diamond-shaped signs or white light signals give instructions to tram drivers only. Rule of 300 of the Highway Code states: You MUST NOT enter a road, lane or other route reserved for trams. Take extra care where trams run along the road.
What does this sign mean give way tram?
Obey the ‘give way’ signs. Trams are unable to steer around you if you misjudge when it’s safe to enter the junction.
What do tram signs look like?
Tram Signs: What You Need to Know All diamond shaped road signs are for tramcar drivers only (for instructional purposes). As a rule, the route for trams only sign (and buses) are blue road signs. This tram signage has a blue background with the upper sign displaying the tram symbol.
What do diamond shaped signs mean?
Warning Signs
Warning Signs These signs are yellow with black lettering or symbols and most are diamond-shaped. These signs warn you to slow down and be prepared to stop if necessary; a special situation or hazard is ahead.
What are diamond signs for?
Warning Signs These signs are yellow with black lettering or symbols and most are diamond-shaped. These signs warn you to slow down and be prepared to stop if necessary; a special situation or hazard is ahead. Some common warning signs are shown below.
What does Blue Circle with tram mean?
A BLUE CIRCLE generally gives a positive (mandatory) instruction or indicates a route for use only by particular classes of vehicle (see sections on tram signs and bus and cycle signs).
What are 3 types of road signs?
Types of road signs are divided into three basic categories: regulatory, warning, and guide signs. The shape of a traffic sign communicates important information about the sign’s message. In poor visibility conditions, such as heavy fog, you may be able to make out only the shape of a sign.
What does this 30 sign mean?
This temporary sign is used to inform drivers that the previous higher speed limit has been replaced by a 30 mph limit. Minimum speed limit sign End of minimum speed limit sign.
What do you need to know about tram signs?
Tram Signs: What You Need to Know. All diamond shaped road signs are for tramcar drivers only (for instructional purposes). As a rule, the route for trams only sign (and buses) are blue road signs. This tram signage has a blue background with the upper sign displaying the tram symbol.
Are there speed limit signs on the trams?
However, in TSRGD it states that speed limit signs for trams should be in kph, and this is not the case all of the tramways, for instance Sheffield Supertram and Manchester Metrolink, who display speed limit signs in mph. Figure 4.5 also demonstrates the difference in the design and size of tram signs, even on the same tramway.
Why are there diamond shaped traffic signs in the UK?
In the UK, diamond-shaped traffic signs are used to instruct tram drivers. As such, tram drivers are the people who need to directly obey their rules. Nevertheless, it is important to be aware of their meaning if you are to use the road safely.
What are the signs on the tramway in Manchester?
Manchester had several tramway specific signs, including signs instructing drivers when to change between `street running mode’ and ‘segregated running mode’, and diamond signs warning of possible leaf fall areas, adapted from Network Rail signs.