How do I reset my Elkay water filter light?

How do I reset my Elkay water filter light?

Reset the Filter Status Light

1. Remove the top cover of the bottle filling station by unscrewing the two Torx screws.
2. Depress the program button for approximately two seconds until the display changes and then release.

What does red filter status mean?

Water from a fountain with a red filter status is often avoided by staff and students. Yellow [indicates] the water is still being filtered but will need to be replaced shortly. Red [indicates] the filter has reached 100% of its usable life and should be replaced promptly.”

How long do Elkay water filters last?

1 year
Filter should be replaced every 3,000 gallons or 1 year after installation. Equipped with quick-disconnect, 1/4 turn installation, as well as automatic inlet shut-off valve that closes when filter is removed. Designed to reduce lead, particles and chlorine. Also reduces odors and discoloration from incoming water.

What happens if the water filter is red?

Red: The filter cartridge should be replaced when the replace filter indicator light turns red or if the flow of water to the dispenser or icemaker decreases. Green (or no light): The light will either disappear or turn green when it is reset after you have replaced the water filter cartridge.

Is Elkay filtered water safe?

Elkay tests and certifies our filters to NSF/ANSI Standard 53. Water filters are tested and certified to NSF/ANSI 53 to ensure they reduce contaminants, including lead, per the requirements of the standard” (Certified Product Listing, NSF).

How do I turn off my Elkay ezh2o water supply?

Shut off the water supply using the shut-off valve. Turn water shut-off valve handle to the OFF position (clockwise). The handle will be facing up when closed. Activate the water dispenser using a water bottle to relieve pressure in the water line.

Is EZ h2o filtered?

Elkay ezH2O Bottle Filling Station & Single ADA Cooler, High Efficiency Filtered Refrigerated Stainless. Hermetically sealed refrigeration system provides chilled water to satisfy thirst. Fill rate is 1.1 GPM.

Why is the filter light on my Elkay ezH2O not working?

When the filter light on your Elkay ezH2O bottle filler is illuminating the red light, then your bottle filler is not supplying filtered water from the unit.

How do you change water filter on legacy EZH2O?

Learn how to change a water filter and reset the filter status light on new and legacy ezH2O bottle filling station models. Remove the lower cover by removing the (four) screws on the underside of the cooler. Turn off the water supply; then dispense water to relieve pressure (through either the bubbler or the bottle filler).

How do you remove a water filter from an Elkay cooler?

Remove the lower cover by removing the (four) screws on the underside of the cooler. Turn off the water supply; then dispense water to relieve pressure (through either the bubbler or the bottle filler). Turn the used filter clockwise quarter turn to remove from the filter head and dispose.

How big is an Elkay ezH2O bottle filling station?

Elkay ezH2O Bottle Filling Station & Single ADA Cooler, High Efficiency Filtered Refrigerated Stainless Material Stainless Steel Number of Stations 1 Features Antimicrobial, Filtered, Green Ticker ™ Power 115V/60Hz Dimensions L: 18-3/8″ W: 19″ H: 39-1/16″