How do I fix the Sud error on my Kenmore washer?

How do I fix the Sud error on my Kenmore washer?

SUD : The Sud error code is used to indicate there are too many suds for the washer to remove. This is often caused by too much detergent being used or non HE detergent being used in an HE machine. Run the machine through a Rinse/Spin cold water cycle then a Normal cycle without adding any additional soap.

How do I fix my SUD error?

How to fix the error

1. Wait for a little for the suds to dissipate.
2. Clean the drain filter upon completing the wash cycle;
3. Remove excess powder by running the washing machine without clothes and setting a long wash cycle and high temperature;
4. Change the detergent if you notice a lot of suds.

What do you do when your washing machine says Sud?

The washer has detected too many soap suds; it should pause automatically and wait for the suds to dissipate. Making sure you are using a high-efficiency detergent, not using too much detergent, removing detergent residue from the washer, and cleaning the drain pump filter should resolve the issue.

Why is my washer flashing Sud?

It means you are using detergent improperly. If your washing machine has the word “SUDS” on the display, it has detected an over-sudsing condition, and will stop for a short period to allow the suds to dissipate. This error code is usually caused by too much detergent, or the wrong type of detergent.

What is Sud in Kenmore washing machine?

The “SUD” error code is found in a variety of high-efficiency washing machines including Whirlpool, Kenmore, and Samsung models. The error indicates that there is an excess of soaps suds in the washer drum and it’s inhibiting functionality—this is known as a “suds lock.”

How do you fix too many suds on a washing machine?

If you have it on hand in your home, adding in a half cup white vinegar to the washer or in the detergent dispenser can calm the bubbles down. You should notice it working almost right away. You may also want to add vinegar when you rinse the clothing on a rinse cycle to ensure that the clothing comes out clean.

How do you fix a SD on a washing machine?

Simply put, too much detergent was used and an excessive amount of suds or foam was produced. Adding an additional rinse cycle without adding any more detergent might fix this problem. Sometimes the machine will automatically detects this problem and add a pause and additional rinse cycle in order to break up the suds.

What does Sud lock mean?

Suds lock is the linking of the outer water jacket and the spin bowl with frothy detergent. It makes the spin bowl hard to turn so placing a greater load on the electric drive motor.

How do you unlock a Kenmore Elite he3t washer?

There is a tab on the bottom of the door lock assembly that you can pull until it clicks to manually unlock the washer door.

How do you reset a Kenmore he3t washer?

How to Reset a Kenmore Elite HE Washer

1. Press the “Stop” button twice, and then press the “Power” button. Video of the Day.
2. Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
3. Press the “Start” button to complete the reset process and restart the washing machine.

What is Sud Loc?

What does Sud mean on Kenmore Elite He3?

There is one plain English code and that’s “SUD,” which refers to the Suds Routine. Check the display for an error message and identify the error message. “SUD” means that the Suds Routine has run and excessive suds remain and have been detected. “F20” indicates a water inlet problem with no or insufficient water supply.

Why is my Kenmore Elite He3 washer flashing Sud?

error code is used to indicate that there are too many suds for the washer to remove. This is often caused by too much detergent being used or non HE detergent being used in an HE machine. Check the drain hose and make sure the hose is not plugged or kinked. Press pause/cancel twice to clear the display.

What does F20 mean on Kenmore Elite He3?

“F20” indicates a water inlet problem with no or insufficient water supply. “F21” is a drain problem. “F22” is a door lock issue. Use HE (high-efficiency) detergents if the SUD error shows.

What does Sud code mean on Whirlpool washer?

The “SUD” error code is found in a variety of high-efficiency washing machines including Whirlpool, Kenmore, and Samsung models. The error indicates that there is an excess of soaps suds in the washer drum and it’s inhibiting functionality—this is known as a “suds lock.” RELATED How Much Laundry Detergent Do You Need?