How much can I bore 366?
General Specifications. The 366 BBC is a cast-iron block with aluminum cylinder heads. The engine has a maximum towing capacity of 10,500 pounds. The maximum GCWR, which refers to the maximum total weight the engine can power, is 16,000 pounds.
How much horsepower does a Chevy 366 have?
The 366 is an eight-cylinder, 6-liter engine. It has 300 horsepower at 4,400 rpm. It has a bore and stroke of 4.00 and 3.62 inches respectively.
Is a 366 a tall deck?
The 366, which is considered a tall deck motor because of the elevated shape and design, has a small bore and long stroke, making it a powerful workhorse that doesn’t produce particularly high rpm. …
How do you tell a 366 from a 427?
The two engine have the same bore. The 427 has longer stroke, that will give you more lugging power and start a load easyer. If you think about the 366 is not much more than a 350. If I remember right the 427 has about 25 or 30 horse over the 366.
What is a tall deck 427?
as stated, tall deck 427s were/are truck blocks. Dont use the pistons and i seem to remember the head ports were quite small, but these blocks can make a nice street motor, or these days with all the goodies you can buy for them, an excellent race motor.
How much horsepower does 383 stroker have?
383 Stroker Performance Specs The latest version of this crate engine is able to reach 450 horsepower and 450 lb-ft of torque.
Is a 366 a good motor?
The 366 is a low torque engine and aren’t good for anything except heavy hauling.
Is a 366 externally balanced?
The 366 is internally balanced as is a 396 or 427) and he’d clean up the block, buy the suitable 3 ring aftermarket pistons to fit, Use a set of RECTANGULAR port heads (aluminum Edel brock or World Products even), 1.8 roller rockers, an Edelbrock victor intake (use the???
How much horsepower does a 427 big block have?
By 1967, Chevrolet offered horsepower ratings of 385 and 400 on two 427s, with the torque rating for both at 460 pound-feet. The 425-horsepower 427 remained untouched. However, Chevrolet introduced its L71 427 with three two-barrel carburetors to generate 435 horsepower and 460 pound-feet of torque.
Did Chevy make a tall deck 454?
The 366 and 427 were always tall deck thru all the years offered in the Heavy duty 2 ton truck series. The 454 was short deck in all cars and pick ups but not sure about in the 2 tons.
What is a 427 Chevy motor worth?
Registered. If you’ve got any paperwork on the engine and it was built by a reputable builder, it might be worth $4k. If not, you’re looking at $1500-$2000.