Do you need a scope riser?

Do you need a scope riser?

Your red dot sight or scope isn’t aligned with your iron sights. So having your sight align with your iron sights is overall a great benefit. Though, the chances are likely that your iron sights won’t be perfectly aligned with an aftermarket sight. If this is the case, you’ll need a rail riser.

Does a red dot need a riser?

You will need a 1″ riser mount.

What does Scope Riser do?

Generally, risers are only used to lift your red dot sight so that one can use their iron sights as a backup, without removing the red dot.

Is the M&P 15 22 Reliable?

There had been no malfunctions of any kind, with any load. The M&P 15-22 Sport has an excellent track record, and these new model variations can make entry into action-rimfire rifle competition an affordable affair. It can run a match out-of-the-box. Accuracy tests conducted from a 25-yard benchrest.

What is the difference between co-witness and 1/3 Cowitness?

The main difference between the two is the amount of iron sight that occupies the sight picture of your red dot. With absolute co-witness, you are getting 100% of the iron sight present through your red dot. With a lower 1/3 co-witness, you see the bottom third of your iron sights through the optic.

Should I mount red dot high or low?

A good guideline is to place the front of your red dot mount so it is aligned with the second picatinny section on your receiver. This will allow for maximized peripheral vision and will give a little extra room when removing your handguard.

What size riser do I need for my red dot?

Depending on your personal preference for sight height, you may opt for the 0.83″ Riser, or the 1.0″ Riser. If you like your sights all on the same plane, or don’t plan to use backup sights, the 0.83″ Riser is a good fit. It’s what most folks tend to prefer.

What is absolute Cowitness height?

Absolute cowitness – Optic is mounted at the same height as the iron sights or about 2.6″ above center of the bore. Lower 1/3 cowitness – optic is mounted slightly higher than the iron sights or about 2.8″ above center of the bore.

What is a co witness riser?

Co-witnessing refers to the relationship between an optical sight and the iron sights of your firearm. When the optical sight’s red dot aligns with the iron sights, the two work together as co-witness sights.