How do I access my Brother printer settings?

How do I access my Brother printer settings?

FAQs & Troubleshooting

1. Open the Printers Folder. Click here to see how to open Printing Preferences.
2. Right-click on the Brother printer driver and left-click on Printing Preferences. You can change the following settings: Basic tab. Advanced tab. Print Profiles tab. Basic tab.

How do I turn off my Brother printer?

How do I turn off my Brother machine?

1. To turn off your Brother machine, press and hold the.
2. – Once the LCD reads ‘Shutting Down,’ it will stay on for a few seconds before turning itself off.

How do I connect my Brother printer to my phone?

Android™

1. Tap the Settings icon.
2. Tap Wi-Fi.
3. If your Wi-Fi is turned Off, turn it On.
4. Find the SSID you wrote down earlier, and then tap it.
5. Enter the network key (password) you wrote down earlier, and then tap CONNECT.
6. The wireless connection setup is complete if Connected appears under the SSID name selected earlier.

Do printers have a reset button?

Reset Button Models It is usually on the top right-hand side of your printer, near any digital display screen that the printer may have, and where the button used to turn the computer on and off is also located. Find the button marked Pause/Reset on the row of buttons on the control panel.

Where is the print settings button on brother?

If you are using Brother’s Windows ® printer driver, you can print the current printer settings page by clicking the Print Settings button in the Support tab. You can print a list of the internal fonts using the control panel button or printer driver.

How do you press the go button on a printer?

Hold down the Go button as you turn on the power switch. Keep the Go button pressed down until the Toner, Drum and Paper LEDs light up. Release the Go button. Make sure that the Toner, Drum and Paper LEDs are off. Press the Go button twice. The printer will print a list of the internal fonts.

What does the go button on the control panel do?

Control panel button (Go button) The control panel button has the following functions: Wake-up. If the printer is in Sleep mode, press the Go button to wake the printer up and go to the Ready state. Error recovery. If there is an error, the printer will recover automatically from some errors.

How can I print from the control panel?

You can print the current settings using the control panel button or printer driver. Make sure that the front cover is closed and the power cord is plugged in. Turn on the printer and wait until the printer is in the Ready state. Press the Go button three times within 2 seconds.