How do I connect my Phonak TV Link?
Press the pairing button on the back, and the main indicator light will start rapidly blinking blue. Make sure TVLink II and the streamer are within 1 meter (3 ft) range. TVLink II will remain in pairing mode for two minutes or until the pairing has been completed.
Is Phonak TV Link BlueTooth?
The Phonak TV Link S connects to the audio output or headphone jack of almost any audio source such as TVs, stereos, Mp3 players, radios, computers, etc. and then transmits that audio signal by BlueTooth to a wireless BlueTooth receiver you wear. The Phonak ComPilot is a good example of a BlueTooth receiver.
How do I reset my Phonak TV Link?
Resetting the TV Connector
- Press the connect button on the back of the TV Connector for 7 seconds.
- During the 7 seconds- the LED will initially flash Blue- then Red.
- Once the reset is finished Phonak hearing aids that were previously connected to the device have been erased from the TV Connector memory.
How does Phonak TV connector work?
The TV connector allows you to connect your Phonak Marvel hearing aids to your TV or other entertainment/ communication devices. It uses Phonak’s AirStream™ technology to transmit sound from your audio device into your hearing aids, which will result in less battery consumption than traditional Bluetooth solutions.
How do I connect my Bluetooth Phonak hearing aid to my TV?
Phonak hearing aids cannot connect directly to a television. The Phonak TV Connector device is required to stream the TV audio directly to the Phonak hearing aids. This will turn your hearing into a wireless stereo headset. 3.
How do I put my Phonak in pairing mode?
Go to the Android phone’s home screen and tap on the “Settings” icon. In the settings menu, tap on the Bluetooth icon. Tap on the slider button to turn Bluetooth on. Switch your Audéo Marvel hearing aids off and turn them after 5 seconds again on, to place the hearing aids in pairing mode.
How do I reset my TV connector?
Using a straightened paper clip or ball-point pen, press and hold the recessed RESET button on your TV connector panel. Continue to hold the RESET button for approximately 15 seconds. During this time, the status light turns off, and then turns on bright, and then pulses.
Can you connect Phonak to TV?
Phonak hearing aids cannot connect directly to a television. The Phonak TV Connector device is required to stream the TV audio directly to the Phonak hearing aids. This will turn your hearing into a wireless stereo headset.
How do I connect my Phonak Hearing Aid To my Smart TV?
Insert the smaller end of the USB cable into the free socket of the TV Connector. Alternatively the TV Connector can be powered via USB cable on the TV. Insert the larger end of the USB cable into the USB socket of the TV. The TV Connector can be connected to any audio source such as a TV, PC or HiFi system.
What is the Phonak tvLINK 2 basetation used for?
The Phonak TVLink II basestation is the interface to TV and other audio sources. Used with Phonak ComPilot II or ComPilot Air II, it turns any Phonak wireless hearing aids into a headset with a range of up to 30 meters (100 ft). This solution offers stereo sound quality and low latency transmission for a rich audio experience.
Can a Phonak TV link be used with a laptop?
When used in conjunction with the ComPilot, ComPilot II or ComPilot Air II, you can capture the very best sound from a variety of audio sources, including laptops, tablets, computers, iPods and MP3 players. The TVLink II also serves as a charging cradle for the Phonak Streamers.
Is the Phonak tvLINK 2 compatible with compilot air II?
Phonak TVLink turns Phonak hearing aids into a wireless TV or music headset with stereo sound. The TVLink II basestation offers digital audio inputs, a dedicated pairing button and a charging slot that is also compatible to ComPilot Air II. The Phonak TVLink II basestation is the interface to TV and other audio sources.
Can a Phonak Hearing Aid be used with a TV?
Used with Phonak ComPilot II or ComPilot Air II, it turns any Phonak wireless hearing aids into a headset with a range of up to 30 meters (100 ft). This solution offers stereo sound quality and low latency transmission for a rich audio experience. It also prevents the TV volume from being set too loud for other individuals.