What are PCB connectors?
A ‘PCB’ or Printed Circuit Board connects electrical components on a conductive track or between pads on the board. PCB connectors are mounted on the PCB and are typically used to transfer signals or power from one PCB to another, or to transfer to or from the PCB from another source within the unit.
What is Samtec connector?
Samtec offers the largest variety of board-to-board connectors in the industry. Popular applications include high speed mezzanine and high density array systems, high speed edge card and backplane systems, and micro pitch board stacking systems down to 0.40 mm pitch and 1 mm stack height.
How many types of BTB connectors are there?
BTB connectors are divided up into four mounting types: Through-hole technology. Surface-mount technology. Plug-in technology.
How do I connect 2 PCBs together?
just make staples out of paper-clip wire and solder them in. alternate top and bottom for extra rigidity. I would consider connecting them with 90° angled male and female header pins, while on each end of those add 2 “spacers” and use small (such as M3) screws to hold in place, as shown on photo below.
How do I connect two PCBs together?
If you have a custom enclosure this is the most easy way of mounting: just push the different PCBs down the snaps. No screws, no mounting holes. The spacing between PCBs is 3.81 mm (0.15 inch). If you want to be able to seperate the boards again you can use feed through sockets on the top boards.
Where are Samtec connectors made?
New Albany, Indiana
Samtec is headquartered in New Albany, Indiana, USA with sales and manufacturing facilities across the globe in essentially every major market.
What is PCB header?
PCB (Printed circuit board) headers are a type of electrical connector that allows you to join connections to a PCB using a single block. Typically headers have one side that is designed to be surface mounted and soldered onto the board with the other side allowing connections.
What is kinked pin?
Kinked pins (also known as locking leads) are used as a method of fastening a through hole pin header or socket to a PCB prior to soldering.
What are board to board connectors used for?
Board-to-Board (BTB) Connectors. This type of device is engineered to provide signal connections between two printed circuit boards (PCBs). Our board-level interconnects are manufactured to give you more performance in the harshest applications.
Are there any board in connectors that do not need unmated?
Molex’s Board-in connectors meet the requirements of a cost-effective easy-to-assemble connection that does not need to be unmated on at least one end. Compared to competitive Board-in types, Molex offers the widest range of pitch options, mating configurations and circuit sizes.
What kind of board to board connectors does Molex use?
Molex offers a wide variety of Board-to-Board Connectors for microminiature, high-speed, high-density, and high-power applications, such as stacking, mezzanine, coplanar, orthogonal and PCB connectors
What kind of battery connectors do I Need?
Fine-pitch battery connectors that provide up to 10.0A, a hybrid interface, wide alignment guides for easier mating and a robust metal armor cover that acts as housing protection for secure electrical and mechanical contact EBBI 50D series meets the market demand for low-cost, unshielded, high density, leaf-style connectors.