How much boost can a stock 460 hold?
it is well known that the BBF 429/460 based blocks can with hold 1200 hp without any issues…
Can you turbo a 460 Ford?
there is no turbo you are going to find in the junkyard that is going to be big enough to support a 460. most turbos are designed to work well on engines less than 3 litres.
What can 460 be stroked to?
Auto Machine transform a 460 into a stump-pulling 501ci stroker with over 500 lb-ft of torque from 2,300 to 5,300 rpm. See all 20 photos Ford 429 and 460 blocks share the same 4.36-inch bore diameter but juggled stroke to get 429 (3.59-inch stroke) or 460 (3.85-inch stroke) cubic inches.
Can you stroke 460?
See all 20 photos Ford 429 and 460 blocks share the same 4.36-inch bore diameter but juggled stroke to get 429 (3.59-inch stroke) or 460 (3.85-inch stroke) cubic inches. Any healthy 429 or 460 block can be made into our 501 with a 0.0305-inch overbore and 4.3905-inch bore diameter.
How much can I bore a 460?
Some 429/460 blocks can go . 060″, some can go . 080″, and some have been known to go 4.500″ bore (0.140″ over).
How much does it cost to build a Ford 460?
Of course the word budget means different things to different people. We think about $3000 is a proper sum for building a 460 from the ground up. This is assuming you don’t have the block, heads, or intake to start with. If you are already in posession of these parts then naturally the costs come down.
What are the casting numbers for a Ford 460 engine?
Just as with any other project, in order to make big power from a 460 engine you need to start with a good block. The most common production block casting numbers are C8VE-B, C9VE-B, D0VE-A, D1VE, and D9TE-AB. The D9TE-AB block is considered a late-style block, being produced from 1979 until 1997.
What kind of Stroker does a Ford 460 have?
Every enthusiast seems to have a passion for a particular brand of manufacturer. Off-the-shelf stroker kits are commonly available for the 460 engine. This kit consisted of a 4.500” stroke forged micro-polished crankshaft, forged pistons with 35 cc dish, SFI approved damper, and 6.700” H-beam connecting rods.
Is there a cast iron head for a Ford 460?
There is one manufacturer that produces a CNC version cast iron head known as the “F460”. Being intrigued by the performance potential and availability of aftermarket parts for a 460 we decided to build a stroker version for street use.