Can you use the same SSID on multiple access points?

Can you use the same SSID on multiple access points?

It is permissible to have multiple AP with the same SSID. This is standard practice in a multi-AP environment. You just need to make sure they are on different channels. You can leave them broadcasting if they are both the exact same SSID, or you can disable the broadcast on the second and follow what Mike said.

Should access points have same SSID?

The APs should be on different channels to avoid interference. If there are other APs in the building, try to minimize co-channel interference by selecting unused channels (if possible). You can use the same SSID, which will make roaming a little easier.

Can two networks have the same SSID?

You can run two routers with the same SSID to increase the range of your Wi-Fi network, but you must set up one router to handle the network administration and the other to act as a bridge back to the primary router.

Should my 2.4 and 5Ghz same SSID?

Almost all current wireless devices support both 2.4Ghz and 5Ghz frequencies. Older 2.4Ghz only devices will just connect to the 2.4Ghz frequency and not even see the 5Ghz frequency, so having the same SSID will work fine for them.

Should all my access points be on the same channel?

Proper channel selection is essential for excellent wireless coverage. Nothing wrong with this as long as the access points use non-overlapping channels. If the channels do overlap it could cause a situation where their access points interfere with each other.

Can you have too many WiFi access points?

When you have APs in overlapping channels, it causes interference. If channels overlap and there are too many APs this will definitely cause poor performance. The purpose of a WiFi site survey is to determine the best and most optimal AP placement for the best coverage without channel overlap.

Should all access points be on the same channel?

When APs have overlapping coverage they should be set to different non-overlapping channels. This prevents the APs from causing an increase in channel utilization or interfering with each other. The goal of using different non-overlapping channels is to avoid the affects caused by channel utilization and interference.

What happens when two SSID are the same?

Two identically named SSIDs with the same password will allow your device to connect to either, without having to add any extra networks on your devices. If both routers are broadcasting from the same location, the expected behaviour will vary depending on device.

Is SSID and WiFi name the same?

SSID is simply the technical term for a Wi-Fi network name. You’ll see this name when you connect your devices to your wireless network.

Should I enable both 2.4 GHz and 5Ghz?

The thing with 2.4Ghz and 5Ghz dual band routers is you’re wasting bandwidth if you are using separate networks for the two bands, you should be able to name the two networks the same and use the same password, that’ll allow 5Ghz capable wireless cards to use both that and 2.4Ghz which in some cases is slower but a …

What WiFi channels do not overlap?

In the 2.4 GHz band, 1, 6, and 11 are the only non-overlapping channels. Selecting one or more of these channels is an important part of setting up your network correctly.

What are the disadvantages of using the same SSID?

Basically the disavantage is that you will have two APs broadcasting the same SSID. If a client device is between the two APs it may have connection issues such as bouncing between the two AP or not knowing which one to connect to and not connecting at all. This can typically be fixed by relocating the range extender further away.

Is it possible to use the same SSID on two routers?

It is also possible to use the same SSID on both routers, so you don’t have to switch depending on where you are in the house. But there are also other benefits of having two routers except for better WiFi.

Is the ac750 RE220 range extender the same SSID?

The new networks on the AC750 RE220 Range Extender have the SSID with a _EXT extension by default. What are the disadvantages if I renamed them to the same SSID as on the primary router?

What’s the point of having a second router?

However, if you have an old router laying around at home, then what’s the point of purchasing something else like an extender or a power adapter, when you can just use your old router? Having a second router means that you can get more ethernet ports, for example.