How do I fix my Samsung front load washer not spinning?

How do I fix my Samsung front load washer not spinning?

To fix a Samsung washing machine that’s not spinning, do the following:

1. Distribute the washing evenly around the drum.
2. Fix an overloaded or underloaded machine.
3. Switch the washing machine off and on again and start a new program.
4. Clean the drain pump filter.
5. Clear the drain hose.
6. Fix the motor.

Why is my Samsung front load washing machine not spinning?

If your washer isn’t spinning properly , it could be because of an unbalanced load, which makes it harder for the drum to spin. An unblanced load also cause errors. “Ub” or “Ur” display is one of the sign that your washer is unbalanced. This may be because the washer is lopsided or because the load inside is uneven.

How do I force my Samsung washer to spin?

To run a Spin Only cycle on a model that does not have this option on the cycle selector dial, perform the following:

1. Power the unit on.
2. Press and hold the spin key for approximately 3 seconds. A chime will sound.
3. Select the spin level, if desired.
4. Press the Start/Pause button.

What is wrong with my washing machine when it won’t spin?

An unbalanced load of laundry is one of the most common causes of an inadequate spin cycle. Sometimes clothing can settle on one side of the drum, throwing off the motion of the washing machine. If you suspect a distribution problem, try rearranging your clumped-up wet laundry and running the spin cycle again.

How do I reset my Samsung front loader washer?

What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a “reset” of the washer.

How do you reset a Samsung front load washer?

Samsung front loader reset. Close door, press power to turn off. Unplug washer for ten minutes. Plug back in then press and hold power button for 5 seconds to reset.

Why is my Samsung washer not spinning?

Check your breaker box and examine the breaker associated with your washer. If this breaker is in the “Off” position, there may have been a power surge that turned off your washer, thus making it impossible for your washer to spin.

What are the problems with Samsung washers?

Problem: Washer trips the electrical circuit in the home when it is turned on. There has been a recall on Samsung front load washers because water leakage onto the electrical connections of the washing machine’s thermal sensor can cause an electrical short and ignite the circuit board, posing a fire hazard to consumers.

What does ND mean on front load Samsung washer?

The nd error code on your Samsung front-load washer means water isn’t draining from the washer. The likely causes are a stopped-up washer drain or a clogged drain pump filter.