How fast does a 15 hp Evinrude go?
I clocked my setup with gps at 28 mph with me and my gear. Me and just the boat it will hit 32 mph on glass days. 2 guys and gear takes it down to about 20 to 22 mph.
How do I adjust my Evinrude carburetor?
Tell your assistant to reduce the throttle setting to “Idle.” Turn the idle speed adjustment screw with a screwdriver until the shop tachometer indicates that the engine is running in the correct r.p.m. range, 1,000 to 1,300. Allow at least 15 seconds between each turn of the idle speed adjustment screw.
How fast is a 9.9 Evinrude?
The propeller is 9 1/4″ diameter x 8″ pitch. (Stock is 9 1/4″ x 10″) Top speed is 20 mph on the GPS.
What does the idle screw do?
The idle mixture screw controls the air fuel mixture at idle speed, and often is located near the throttle plate.
Is there a carburetor rebuild kit for Johnson Evinrude?
NEW! Performance Carburetor Rebuild Carb Repair Kit for Johnson/Evinrude 6 8 9.9 15 20 HP 0431897 . Only 5 left in stock – order soon. . . . .
Where are the carburetors located on a 9.9 Evinrude?
In the float chamber here is a white nylon collection box that is sandwiched and gasketed between the main body and the bottom fuel bowl that has a removable main-jet on one side. These carburetors appear the same for the 9.9 and the 15 hp with the exception of the main-jet AND the throat dia. in the main body.
Is the choke lever the same on a 1987 Evinrude?
Late 1987 and newer production carburetors up thru 1992 were completely different, had the bottom fuel bowl and top made of HEAVY black plastic. The choke lever is the same in these newer carburetors even though the motors used the cable twist grip which utilized a totally different throttle system.
What are the float needles on a 1974 Evinrude?
You may see float needles used a nylon tapered tip for the actual shut off seal even on the early production 1974 but these may be replaced parts over the lifetime of the motor. When ordering carburetor repair kits for these older carburetors, you will find a small white Nylon funnel that is actually a needle bearing.