What does a rack mixer do?
StudioLive AR-series and StudioLive Series III rack mixers provide an onboard stereo SD recorder that lets you capture the main mix. Whether recording live or in the studio, the next step is to mix in a controlled environment. But you don’t have to choose between recording a stereo mix and recording individual tracks.
What is a mix desk and what does it do?
Put simply, a mixer (sometimes known as a mixing desk, mixing console, mixing board, desk or console) takes various audio sources through its multiple input channels, adjust levels and other attributes of the sound, then usually combine them to a lesser number of outputs.
How does a mixing board work?
Simply put, a sound board (also known as a mixing board or mixer) takes multiple input signals—such as microphones, instruments, iPods, DJ turntables, etc. —and merges them together so they can be sent to speakers as one signal.
What is a bus on a mixer?
A bus is basically a path in which you can route one or more audio signals to a particular destination. Commonly busses are used to route channel signals to a master group fader, a multitrack recorder, or the main stereo master fader (or all). …
What is rack mount mixer?
One common Rack Mount device is a PA Mixer. Rack Mount or Rack Mountable PA Mixers, Mixing Consoles, or Mixing Boards help you get the signal from your microphones and instruments into a single stereo output.
What is broadcast mixing?
A broadcasting desk lets you balance, position, effect, and equalise different audio channels into a single “audio image”, otherwise known as a mix. Basically, it combines multiple audio signals, processes them, and pushes them out to your computer or speaker system.
Why do I need a mixing desk?
Mixing consoles can also come in handy for recording multiple channels at once. While a solid audio interface can get this job done, mixers typically feature more inputs and give you more control over the signal going in. You can also use mixers without a computer or DAW.
What are groups on a mixing desk?
Groups (sometimes called “subgroups”) are a great way to organize your mixes and make them easier to manage. They also provide the ability to route signals to additional devices so that you can record or send audio to multiple locations.
What is on a mixing board?
Mixing board, mixing desk, mixing console, sound board, audio mixer – all these names refer to the same thing. Basically, a mixing desk brings together all of the different instruments and parts you’ve written and recorded into one place. You can then change the parameters of each part as you wish, such as: volume.
What is the difference between an AUX and a bus?
Buses group tracks together (allowing for group processing) and auxes affect the duplicate signals of tracks (allowing for parallel processing). If you ever hear someone use the term “return track,” they’re referring to an aux track.
What is a 2 bus in mixing?
A: In traditional engineer/producer jargon, the 2-bus (not 2-buss, that would be something different) is the main stereo or 2-channel output from a mixing console. The term is now applied to virtual mixers, summing boxes, and more.
Do you need a rack mount for a digital mixer?
Some customers complain that they have to press hard on the screen. Mounting is not included when rack mixer is purchased. This modest and rather inexpensive device can easily become the best rackmount digital mixer for your particular goals. It suits ideally when you need to organize a party in a club or some small venue.
How many rack units do you need for rackmount?
If your piece of rackmount gear only occupies 1 rack unit (1U), and you’re on your own, then you can probably just tough it out and hold up the gear with one hand while you screw it in with your other. 2U studio gear will usually be heavier and may give you some trouble.
How does a rack mount work in a studio?
These racks have a frame with ears that protrude out on each side, allowing your gear to be fastened to the frame with screws. With rackmount gear, you conserve space in your studio and also allow comfortable access to the front-panel controls of your studio gear. Most racks also provide easy access to the back of your gear from behind.
What can you do with a mixing desk?
You can then change the parameters of each part as you wish, such as: Using the mixing desk you can combine all of the separate pieces of your production into one whole, and then record that as a stereo file ready to put onto a CD, or to upload somewhere as an MP3.