How do I get my TV to play sound through my home theater system?

How do I get my TV to play sound through my home theater system?

Option 2: Connection using an HDMI, Coaxial Digital, Optical Digital, or Audio cable

1. Connect a Coaxial Digital Cable, Optical Digital Cable, or Audio cable to the Audio Output jack on your TV.
2. Connect the other end of the cable to the corresponding jacks on the A/V receiver or home theater system.
3. Turn on your TV.

How do I connect my wired home theater to my TV?

1. Connect an HDMI cable to the HDMI ports labeled ARC, or the port identified in your manual that supports ARC.
2. Set Speakers to Audio system. The steps below are an example on Android TV or Google TV.
3. Turn on the Control for HDMI setting on both the TV and the receiver or home theater system.

Why is my surround sound not working with my TV?

Try different cables to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. Check each speaker to make sure they are properly connected to the A/V receiver. Perform a Test Tone function to verify if the speakers are working correctly.

Where is HDMI on Panasonic TV?

Press the [Menu] button. The “Main Menu” screen appears. Use the [▲ ▼ ] buttons to select “Setup”. Use the [▲ ▼ ] buttons to select “HDMI control”.

How do I get my 5.1 speakers to work?

Go to the Playback and select your playback device that is capable of outputting 5.1 sound. Keep in mind that the name might vary according to your soundcard. With the speakers selected, click on Set Default and then hit the Configure button. In the Speaker Setup window, select 5.1 Surround and hit Next.

How do I connect my Samsung TV to my Panasonic HTS?

You may have to turn the TV speakers off too. Connect the analog out of the converter to the TV audio input on the HTS with a standard RCA stereo cable. Select that input and set the surround sound mode on the HTS as you prefer it. How do I connect my SAMSUNG TV model UN55H6203AF to an old Panasonic SA-HT930 home theater system?

How do you connect a TV to an audio converter?

You will need to connect the TV optical audio out to an optical to analog converter with a toslink cable. Turn the optical out on and set the TV to output in PCM. You may have to turn the TV speakers off too. Connect the analog out of the converter to the TV audio input on the HTS with a standard RCA stereo cable.

How to change the fuse on a home theater system?

1. Open the fuse cover with a screwdriver. 2. Replace the fuse and close or attach the fuse cover. Figure A Figure B Fuse cover Figure A Figure B