How do you Restain a dresser?

How do you Restain a dresser?

How to Refinish a Dresser

1. Step 1: Choose a Stain. Staining beautifies wood and helps reduce the contrast between the different types of grains in different pieces of furniture.
2. Step 2: Remove Hardware, Drawers and Clean Surfaces.
3. Safety Alert!
4. Step 3: Remove Old Finish.
5. Step 4: Apply Sanding Sealer.
6. Step 6: Finish It.

What does it mean to refinish furniture?

In woodworking and the decorative arts, refinishing refers to the act of repairing or reapplying the wood finishing on an object. In practice, this may apply to the paint or wood finish top coat, lacquer or varnish. The artisan or restorer is traditionally aiming for an improved or restored and renewed finish.

How do you tell if you can refinish a table?

To get an idea of what your piece will look like refinished, find a protected spot where the original wood is visible, such as the back of a solid-wood drawer front, underneath the top surface of a chest of drawers, or the backside of a leaf in a drop-leaf table.

Do you have to completely strip furniture before staining?

There’s no stripping or heavy sanding necessary to remove the old finish! Simply give it a light sanding with fine-grit sandpaper, remove sanding dust, and brush on a coat of PolyShades® (see step-by-step instructions provided in this Guide).

What is the difference between restoring and refinishing furniture?

Talking about restoration, it refers to a process of cosmetic repairs and light cleaning of the furniture. On the other hand, furniture refinishing basically comprises stripping the current finish of the furniture piece to coat with something new.

How much does it cost to get furniture refinished?

Average cost of refinishing furniture ranges from $100 to $2,000. The total cost depends on difficulty, furniture size, its antique value and other factors. It could also be on a per-hour or per-project basis.

How do you refinish wood?

There are many options for refinishing an old wood floor. The best way to refinish wood floors without sanding is to use a technique called screen and recoat. This involves scuffing up the finish with a floor buffer and applying a refresher coat.

How do you refinish furniture?

Spray with a nice even motion following the natural lines of the piece. Apply two coats, sanding in between with 200-grit or higher sandpaper after the first coat is dry. This technique will smooth any imperfections from your first coat and give you a pro grade finish. Then spray on a final layer.

How do you refurbish furniture?

Pull the fabric over the front of the chair and tack it into place. Then stretch the fabric to the back and tack it under the chair. Repeat the process on the two sides. Fold the front fabric on the corners to form a mitred square; fold the front fabric to form a 45 degree angle.

How do you restore antique wood?

The simplest treatments to restore structurally sound wooden antiques are to apply a good quality paste wax, and to clean, repair or replace hardware. A good quality paste wax, found at your local hardware store, can work wonders on a damaged wood finish. Over the years, the knobs and pulls may become corroded,…