What causes a gas dryer to not turn on?
A broken power cord, failed push-to-start switch or a bad timer can also prevent the dryer from starting. Although a blown thermal fuse won’t prevent most gas dryers from starting, all of the other failures mentioned above will prevent the motor from running.
How do you reset a gas dryer?
Remove the heat when the pilot lights, but keep the knob depressed for about 20 seconds to give the thermocouple time to heat up. Release the knob and ensure the pilot stays lit, then turn the knob to the “on” position and replace the panel on the front of the dryer. The dryer is now ready to use.
Is there a pilot light on my gas dryer?
You have to manually light the pilot lights in gas dryers. The last such dryer was manufactured in 1994. Gas dryers have electronic ignition mechanisms that light the burner when the controls call for heat.
What to do if your dryer Won’t Spin?
A broken drive belt is the most common reason a dryer won’t spin. To fix this issue, turn the drum by hand. A working belt should provide some resistance, so if the drum turns very easily and loosely, the belt is probably broken.
What causes a dryer ignitor not to ignite?
The most probable cause of your dryer not igniting is weak solenoid coils. If you find the igniter glowing and fading back off without any burner ignition is a good indication of weak solenoid coils. There are two black colored electromagnetic coils mounted on the gas valve assembly.
Why wont my dryer turn on?
Another common cause of a dryer not turning on is a defective door switch. This doesn’t just mean that the door isn’t closing properly. If the switch is defective, the dryer won’t turn on even if the door is closed all the way. Remove the dryer door switch from the inside frame and test it for continuity with a multimeter .
Why is my Maytag dryer not starting?
Thermal Fuse. The thermal fuse is a safety device designed to protect the dryer from overheating.