How do examiners mark driving test?
During your practical driving test the examiners will be marking down any faults on the driving test report form on their clip board. At the end of your driving test the examiner will total the number of faults you have made. If you have 16 or more minor faults you have unfortunately failed the test.
What does S and D mean on driving test report?
You are allowed up to 4 minor faults in one particular area. Anything more than that will usually result in a serious/dangerous fault. As you can see, the marking sheet has an ‘S’ and ‘D’ section. Just 1 mark in this area will result in you failing the whole test.
What do circles mean on driving test?
Demonstrate the appropriate low risk driving techniques and you will get a tick. But if you fail to demonstrate appropriate low risk driving you get a circle. Consequently you will notice a lot of ticks and circles on the right hand side of the page. You will need to score at least 90% to pass the driving test.
What does R and C mean on driving test report?
This means you performed a reverse park on the road (“R” meaning road, “C” meaning car park), i.e. a parallel park, because nothing is marked next to “Control” and “Obs.” the examiner thought it was a good parallel park and no faults were given.
What is the most common reason to fail a driving test?
Not using mirrors correctly when changing direction It’s something that sounds very simple – look in your mirrors before changing direction, but it’s amongst the most common reasons for learner drivers failing their tests.
Can a driving instructor use a marking sheet?
You can use the driving test marking sheet (DL25) if you’re a driving instructor carrying out a mock driving test. This file may not be suitable for users of assistive technology.
What are the marking guidelines for the driving test?
Based on these marking guidelines, the driving test marking sheet covers all of the necessary sections In which to evaluate your ability to drive and every test applicant should demonstrate that they have the required knowledge and skill and roadcraft to use the roads in a correct and courteous manner.
Where do I find s and D on my driving test mark sheet?
This simply involves reading a car licence plate from a distance of 20 metres (or 20.5 metres for pre-September 2001 licence plates). In almost every category on the driving test mark sheet, you’ll see boxes in both the S and D columns.
What are the grades on a driving test?
The tester will use all of their experience to assess the fault and grade it accordingly under the following headings. Grade 3: Dangerous/ Potentially Dangerous. 9 or more grade 2 faults overall. Grade 1 faults don’t affect the result. Driving faults are not double marked.