What are the clearances for a wood stove?
Clearance to combustible requirements for non certified radiant wood stove is 1200 mm (48″). A stove with a metal jacket casing requires 900 mm (36″). Wood stoves certified for installation in an alcove may not be reduced, unless otherwise stated by the appliance manufacturer or AHJ.
What is the required clearance between the floor and a stove?
What is the required clearance between the floor and a stove? Floor protection should extend a minimum of 12 inches from the sides of the stove and a minimum of 18 inches from the front. If you have a side-loading stove, the floor protection should extend 18 inches on that side.
Does a wood burning fireplace need a hearth?
Keep in mind that your wood-burning fireplace, however, definitely should have a hearth. A hearth helps protect your home from errant sparks that could turn an evening of roasting chestnuts into a traumatizing visit from the fire department.
How close can a wood stove be to a wall with heat shield?
The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.
What should the base of a wood burning stove be?
Different stoves have different requirements, but all woodstoves need to have a non-combustible base underneath. This base should extend a minimum of 8 inches around all sides of the stove and 18 inches in front of any loading doors. In addition, the stove board should extend underneath and horizontal run of the stovepipe connection to the chimney.
Why do you need to follow building codes when installing a wood stove?
These wood burning stoves might save the environment, but you don’t want it to affect your health in any way. Another important reason to abide by the building codes when installing a wood stove is because it can affect your insurance. If you fail to keep up with the requirements then your insurance may not be valid.
When do you need a stove board under the floor?
If you are installing the stove on a combustible surface like a wood floor, you’ll likely need a stove board underneath to protect the floor. The wallboards are only necessary if the walls are within a certain distance of the stove.
How tall does a chimney have to be for a wood burning stove?
All chimneys must extend a minimum of 3 feet above the roof surface and 2 feet higher than any part of the building within 10 feet. Type #2 shows an “out and up” chimney, which exits through a wall and continues up along the side of the home. If desired, this chimney could be boxed in with wood framing and stuccoed or sided to match the home.