What does F mean on a Hotpoint washing machine?

What does F mean on a Hotpoint washing machine?

Advice: We recommend you call our customer service centre to book an engineer on: 0344 822 4224. F15 — Heater control fault (Washing Machine and Washer Dryers) Issue: Washing Machines is not heating water or pauses during a wash cycle / not drying or pauses during drying cycle.

What does F 09 mean on a washing machine?

LONG DRAIN TIME
Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.

What is F error in washing machine?

The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.

What does error F 05 on a Hotpoint washer?

F05 means there is a problem with the pump or there is a waste pipe issue. This problem will mean that your washing machine door may not release, leaving your washing trapped inside, or if it is opening, your washing will be sat in a pool of undrained water.

How do I fix F06 error?

How to Fix F06 on a Whirlpool Duet

1. Touch “Pause/Cancel” twice to cancel the F06 error on the display.
2. Plug the power cord back in and select a new wash cycle.
3. Press “Pause/Cancel” twice again if the F06 error code resumes.

How long does Sud error last?

If you have noticed a SUD code during a washing cycle, it means the suds have exceeded the drum’s usual level. More specifically, this error means that the washing machine is reducing foaming. It has just stopped for 5-10 minutes to allow the suds to dissipate and the washing cycle to go on.

How do you fix the F 28 code on a Whirlpool Duet washer?

An F28 error code is a common problem that means there is a communication problem with the central control unit. This problem is generally solved by essentially rebooting the control unit. Rebooting the control unit is accomplished in less than 10 minutes, even by the novice.

What is the hot point washing machine repair manual?

Our Free Hotpoint Washing Machine Repair Manual was designed to assist the novice technician in the repair of home (domestic) washers that have been operating successfully for an extended period of months or years and have only recently stopped operating properly, with no major change in installation parameters or location.

What does F05 mean on a hot point washing machine?

Hotpoint washing machine fault F05 for example indicates that the pressure switch has become stuck. This means the washing machine refuses to spin as it believes it’s full of water.

What are the symptoms of a hotpoint washer problem?

Why not save yourself a lot of time, hassle and money, and just go there first? Diagnosis and repair procedures are included for the most common symptoms, such as leaking, slowly or not filling, clothes too wet after cycle ends, no agitate, not spinning, not draining, timer, drive motor, electrical troubles and other Hotpoint washer problems.

What does a hot point fault code mean?

Hotpoint washing machine fault codes range from F01 to F18. They offer you an indication of where the problem lies. But you’ll need an engineer with diagnostic skills to fix many issues. Hotpoint washing machine fault F05 for example indicates that the pressure switch has become stuck.