What size is the inner cable on a throttle cable on a Harley?

What size is the inner cable on a throttle cable on a Harley?

Inner Wire Diameter: The diameter of the inner wire, 1.2mm & 1.5mm commonly used for throttle and choke cables, and 2.0mm, 2.5mm, 3.0mm used on clutch and brake cables.

Why does my Harley have 2 throttle cables?

A push/pull throttle cable is an upgrade to the old standard single throttle cable linkage. The throttle grip works on the carburettors when twisting/throttling up and when releasing/throttling down. The second cable pulls the carb closed so it isn’t stuck wide open.

Are both throttle cables the same?

Do you need both? The two throttle cables do each have a different use. It acts as a safeguard, pulling the throttle closed if the spring fails. Now that you know the basics, let’s get into some more specifics on what these two cables do and why they’re important.

Do you need two throttle cables?

You do Not “NEED” both. I’ve been running with the single cable that only opens the throttle for years now.

Which throttle cable is which?

The two throttle cables do each have a different use. The pull cable pulls the throttle open, hence the name. The push cable, however, doesn’t actually push anything. It acts as a safeguard, pulling the throttle closed if the spring fails.

Why is my throttle sticking on my Harley?

A sticky throttle could be caused by worn cables, lack of lubrication in the cables or the cable getting bound up somewhere in the mechanism. Or it can be caused by an issue with the carburetor or EFI. If the screws in the throttle housing are too tight it could cause the cable to stick.

What are the parts numbers of a Mikuni throttle cable?

Throttle Cables Mikuni HSR42/45/48Individual Carburetors Part numbers for individual carburetors: Carburetor Natural Part Number Polished Part Number HSR42 TM42-6 TM42-6P HSR45 TM45-2 TM45-2P HSR48 48-2 48-2P Note: TM42-6 applications use the stock Harley choke cable.

What kind of choke cable do I need for a tm45?

48-2P Note: TM42-6 applications use the stock Harley choke cable. TM45 carbs are furnished with Mikuni choke cable. 48 mm kits include Mikuni choke cable, four main jets and a rubber flange. Mikuni HSR Accessories

What kind of choke cable does a Harley Davidson carburetor use?

Carburetor Natural Part Number Polished Part Number HSR42 TM42-6 TM42-6P HSR45 TM45-2 TM45-2P HSR48 48-2 48-2P Note: TM42-6 applications use the stock Harley choke cable. TM45 carbs are furnished with Mikuni choke cable. 48 mm kits include Mikuni choke cable, four main jets and a rubber flange.

Which is Mikuni jet kit for Evo engines?

For Evo engines, HSR42/45/48 carbs and Mikuni filter. Includes improved chrome banjo fittings and vent bolts. KHS-030 For TC88 engines, HSR42/45/48 carbs and Mikuni filter. Includes improved chrome banjos, vent bolts and brackets. Jet Kit for HSR42 KHS-025