What do you need for DIY Hydro dipping?

What do you need for DIY Hydro dipping?

Step-By-Step Guide to Hydro Dipping

1. Large, deep plastic container (the container will have paint on the inside after the hydro dipping is complete)
2. DIY complete hydrographic printing kit.
3. Object to be dipped.
4. Sandpaper to smooth the surface.
5. Rags.
6. Bucket of mild cleaning solution and water.
7. Vinyl, rubber, or latex gloves.

How much does it cost to hydro dip at home?

Average Costs for Hydro Dipping The average cost for hydro dipping a smaller object, such as cups starts at $30. Unusual items, such as water skis and wakeboards, usually cost $150 to $300 to hydro dip.

Can you use any clear coat for hydro dipping?

STEP 11: CLEAR COAT Clear coating is highly recommended for all hydrographically decorated parts. When the dipped part is dry, apply the clear top coating (matte, semi-gloss or high gloss) to finish off your newly dipped hydrographic part.

What is the activator for Hydro dipping?

INK DRINK FILM ACTIVATOR. INK DRINK Hydrographic Film Activator is an easy to use film activator, compatible with most films on the market. Ink Drink maintains the richness and color vibrancy of your film and activates most films with a single pass (one coat).

How do I start Hydro dipping?

How to Start a Hydro Dipping Business

1. You’ll need to create your business identity.
2. Secure your business location.
3. Find a film supplier.
4. Make sure that you practice.
5. Make sure that you invest into copyrights.
6. Make sure that you have stunning signage.
7. Find a product that really makes you stand out.

What side of Hydro film goes down?

WHICH SIDE DOWN DO I LAY MY WATER TRANSFER PRINTING FILM? We always test which way to lay our film down by licking our thumb and fore finger and pinching the film. The side that sticks to the moisture on your finger or thumb is the side which is water soluble and this is the side which faces down in the water.

Do you have to prime before hydro dipping?

Dupli-Color Primer The first necessary ingredient to hydro dipping is the primer. It promotes adhesion of the transfer film to the object. After applying the primer, allow for it to dry, before transfering a film onto your part. This can take up to two hours.

Is there a DIY hydro dipping printing kit?

But following 4 years of research & development from the most established company in hydrographics, MY Dip Kit has released the original DIY hydro dipping kit for consumers who want hydrographic printing without breaking the bank. So, what is My Dip Kit?

What kind of protective equipment does Hydrographics use?

Hydrographics Films Personal Protective Equipment Spray guns Buffing & Polishing Compounds Hydrographics Activator Lacquers / Clearcoats Hydrographics Speedshapes

What kind of paint do you use for hydro dipping?

The next step in the hydro dipping process is applying the appropriate base coat. We supply the colour we recommend with your film if there is one. If the film has transparent parts in then you will be supplied with the paint colour you have chosen. The paint we supply in our aerosol cans is Max Meyer automotive base coat paint.

What happens to the tape during hydro dipping?

The Dipping Process. This means that when the film breaks away during the dip it will break on the tape so any problems occur on the tape and not the edge of your item. If there are any areas that will allow a lot of water to rush through when hydro dipping apply the making tape to these also now.