How do I find property setbacks?
If you know what Zone the property is in, you may look up the setbacks on our Zoning Table. There are Residential Zoning Tables and Commercial Zoning Tables on our Application and Documents page. You may call our office to find out the setbacks.
How do you calculate setbacks?
Side and rear setbacks Side setbacks are evaluated by the width of the lot, measured at the building line and by the height of the building. At the time of calculation, the height of the building is taken at the closest point to the boundary and not the overall height of the building.
How close to my property line can I build?
The exact amount a building needs to be set back from the property line will vary from one location to another. However, the required setback on the side is typically between 5 – 10 feet, while the front and back require around 10 – 20 feet at a minimum.
What are setback rules?
For greater building heights the setback must equal 25% of the height of the wall greater than 3.3m. For building heights up to 4.5 m – 3 m. For any part greater than 4.5m – 8m. 900mm + 25% of the building height greater than 3.8 metres.
What are setbacks on a survey?
A building setback or building setback line on a survey, site plan or plat in regards to land development is the distance the building is setback from a street, alley, property line or road. Building setbacks are set up by land developers and local Planning and Zoning Offices and are different for every subdivision.
What is set back distance?
Setback distance m or the clearance distance is the distance required from the centerline of a horizontal curve to an obstruction on the inner side of the curve to provide adequate sight distance at a horizontal curve.
What is an example of a setback?
The definition of a setback is an interruption in progress. An example of a setback is someone having a large, unexpected expense while in escrow on a house for which they have to find additional funds.
What is a setback requirement?
Instead, a setback or setback requirement for a property refers to the distance that the house or structure must be from the front, sides, and back of the property line.
How to rationalise the setback provisions in BCA?
To rationalise the setback provisions to clarify that the same provisions apply to all side setbacks and to ensure the eave setback complies with BCA provisions. 5.7 – Include reference to the visual amenity of retaining in new acceptable solution (A11.3). Following investigation as per recommendation b) MIN14.726.
How are side setbacks determined for residential development?
Side setbacks for residential development Side setbacks are determined by the width of the lot, measured at the building line and by the building height. When calculating the setback, the height of the building is taken at the point closest to the boundary and not overall height of the building.
How big should the setback be for a GCBA?
Table 3: Setback of Flats and Condominiums from Good Class Bungalow Areas (GCBA) Setback is increased by 1m beyond 25m for each storey height. For example: Note: A 2m-wide (minimum) planting strip is to be provided along all common boundaries of the development site.
How big of a setback do I need from the road?
Setbacks for existing irregular or odd-shaped plots (excluding newly created plots) For already existing irregular or odd-shaped plots (excluding newly created ones), the standard 7.5m building setback from a road shall apply for a width of 8m, measured from the common boundary line with the adjoining neighbour.