How do I reset my axis camera to factory settings?

How do I reset my axis camera to factory settings?

Axis Factory Reset

1. Disconnect the camera from the power supply and ethernet.
2. Remove the four screws securing the rear cover and remove it.
3. Keep the Control button pressed while you restore the power supply.
4. Hold down the button for about 15 seconds until the status LED is yellow flashing.
5. Release the Control Button.

How do I reset my AXIS m3046 V?

Reset to factory default settings Go to Settings > System > Maintenance and click Default.

How do I reset my AXIS m2025 Le?

To change these settings, the product must be restored to the original factory default settings. To reset or restore the product, go to Setup > System Options > Maintenance in the product’s web pages.

What is the default IP for AXIS Camera?

192.168.0.90
The default IP address for the Axis cameras and video encoders is 192.168. 0.90.

What is the default IP address of AXIS Camera?

How do I reset my axis camera IP address?

Reset Axis IP camera via hardware

1. Disconnect the power cable or PoE injector of the camera.
2. Press and hold the ‘Control’ button on the camera while reapplying power.
3. Keep the ‘Control’ button pressed until the ‘Status’ indicator color of the camera changes to amber.
4. Release the ‘Control’ button.

How do I log into my axis camera?

It is recommended to use the Setup Axis Camera Tool to configure the Axis Camera. If you need to configure the camera manually, connect the camera directly to the computer, configure your computer to have a static IP of 192.168. 0.5 , then open a web browser and enter 192.168. 0.90 in the address bar and press enter.

How do I reset my Tapo camera?

While the camera is powered on, tilt the camera lens up, then press and hold the RESET button for at least 5 seconds until the LED blinks red. The camera will reset and reboot.

What do I need to know about axis m3005-v?

The order of priority, listed in the AMC Control Panel, can be changed and the options disabled, to suit specific requirements. AXIS M3005-V Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User’s Manual for more information.

How do I set default password for axis camera?

To access the Axis IP camera (or other devices), you must set the password for the default administrator user root. This is done in the Configure Root Password dialog, which opens when the product is accessed for the first time. In other words, the new Axis cameras don’t have a default password, you need to create one.

How do I set root password for Axis?

Set the Root Password To gain access to the Axis product, you must set the password for the default administrator user root. This is done in the Configure Root Password dialog, which appears when the product is accessed for the first time.

How to assign an IP address to axis?

For information about how to discover and assign an IP address, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup… Set the Root Password To gain access to the Axis product, you must set the password for the default administrator user root.